| Part Number : 1264-469 | Manufacturer : Bae Systems Inc | ||
| NSN : 3110-01-346-0571 (3110013460571) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 72314 | ||
| NIIN : 01-346-0571 (013460571) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1264469 | |||
Thank you for taking an interest in part number 1264-469, that of which is listed with the description Bearing Ball Duplex; Manufactured by Bae Systems Inc and listed alongside the NSN 3110013460571, part number 1264-469 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1264-469 | Manufacturer : Bae Systems Inc | ||
| NSN Number : 3110-01-346-0571 (3110013460571) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 72314 | ||
| NIIN : 013460571 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 1264-469, that of which is listed with the description Bearing Ball Duplex; Manufactured by Bae Systems Inc and listed alongside the NSN 3110013460571, part number 1264-469 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-346-0571 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 013460571 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1264-469 | 5 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADGA | OVERALL OUTSIDE DIAMETER | 5.2492 INCHES MINIMUM AND 5.2500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 440C BALLSTEEL COMP E52100 INNER RING OR STEEL COMP 440C INNER RINGSTEEL COMP E52100 OUTER RING OR STEEL COMP 440C OUTER RINGPLASTIC PHENOLIC RETAINER |
| ABXV | BORE DIAMETER | 4.7494 INCHES MINIMUM AND 4.7500 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MOLDED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTHQ | BEARING PRELOAD RATING | 100.0 POUNDS NOMINAL |
| CTHY | CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 0.010-IN. MIN GAP-INNER RACES CLAMPED AT ASSY TO OBTAIN PRELOAD; E52100 RACES COATED WITH KAYDON CR101 CROMATE;25 PCT FULL OF SPECIFIED LUBE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALLAISI ASSN STD 2ND MATERIAL RESPONSE INNER RINGAISI ASSN STD 2ND MATERIAL RESPONSE OUTER RING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
