| Part Number : 3M926-3DL2 | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN : 5305-01-471-6546 (5305014716546) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 01-471-6546 (014716546) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M9263DL2 | |||
Thank you for taking an interest in part number 3M926-3DL2, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305014716546, part number 3M926-3DL2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M926-3DL2 | Manufacturer : Fastener Innovation Technology Inc | ||
| NSN Number : 5305-01-471-6546 (5305014716546) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 58998 | ||
| NIIN : 014716546 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M926-3DL2, that of which is listed with the description Screw Close Tolerance; Manufactured by Fastener Innovation Technology Inc and listed alongside the NSN 5305014716546, part number 3M926-3DL2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-471-6546 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014716546 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11883-3DL2 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ASXK | HOLE QUANTITY | 1 |
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| AGAV | III END ITEM IDENTIFICATION | F15 FWD FUS S |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASL | HEAD DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE | GRIP LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 0.531 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| FEAT | SPECIAL FEATURES | MINIMUM SHEAR IS 125 KSI |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES HEAD 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| AAUB | HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| BQDM | HOLE TYPE | DRILLED |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| ABQJ | POINT STYLE | FLAT |
| AASA | THREAD LENGTH | 0.406 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
