| Part Number : 7320002-1 | Manufacturer : Mcdonnell Douglas Corp | ||
| NSN : 5315-01-130-2605 (5315011302605) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 19133 | ||
| NIIN : 01-130-2605 (011302605) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 73200021 | |||
Thank you for taking an interest in part number 7320002-1, that of which is listed with the description Pin Grooved Headless; Manufactured by Mcdonnell Douglas Corp and listed alongside the NSN 5315011302605, part number 7320002-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7320002-1 | Manufacturer : Mcdonnell Douglas Corp | ||
| NSN Number : 5315-01-130-2605 (5315011302605) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 19133 | ||
| NIIN : 011302605 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 7320002-1, that of which is listed with the description Pin Grooved Headless; Manufactured by Mcdonnell Douglas Corp and listed alongside the NSN 5315011302605, part number 7320002-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-130-2605 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 011302605 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7320002-1 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 1.000 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.188 INCHES NOMINAL |
| ABNZ | EFFECTIVE LENGTH | 0.212 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.120 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.200 INCHES NOMINAL |
| ABPE | UNDERCUT RADIUS | 0.060 INCHES NOMINAL |
| AMCS | FIRST END TAPER LENGTH | 0.188 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.023 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| CQSX | SHEAR STRENGTH | 4000 DOUBLE POUNDS PER SQUARE INCH |
| CRDY | FIRST END LOCATION | TAPERED END |
| CRMG | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES |
| CTHC | SECOND END TAPER ANGLE | 25.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
