| Part Number : MS21122C2 | Manufacturer : Military Standards Corp | ||
| NSN : 5340-01-124-0627 (5340011240627) | |||
| Item Name : Clamp,Loop | CAGE Code : 96906 | ||
| NIIN : 01-124-0627 (011240627) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number MS21122C2, that of which is listed with the description Clamp,Loop; Manufactured by Military Standards Corp and listed alongside the NSN 5340011240627, part number MS21122C2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MS21122C2 | Manufacturer : Military Standards Corp | ||
| NSN Number : 5340-01-124-0627 (5340011240627) | |||
| Item Name : Clamp,Loop | CAGE Code : 96906 | ||
| NIIN : 011240627 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number MS21122C2, that of which is listed with the description Clamp,Loop; Manufactured by Military Standards Corp and listed alongside the NSN 5340011240627, part number MS21122C2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-124-0627 Item PartTypeName: CLAMP,LOOP | 5340 | 011240627 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21122C2 | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.457 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.645 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE CUSHION |
| MATT | MATERIAL | STEEL COMP 321 OR STEEL COMP 348 BAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-403 FED SPEC SINGLE MATERIAL RESPONSE CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
