| Part Number : E998-808-5 B-A | Manufacturer : Mpb Corporation | ||
| NSN : 3110-01-211-7523 (3110012117523) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 01-211-7523 (012117523) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: E9988085BA | |||
Thank you for taking an interest in part number E998-808-5 B-A, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110012117523, part number E998-808-5 B-A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : E998-808-5 B-A | Manufacturer : Mpb Corporation | ||
| NSN Number : 3110-01-211-7523 (3110012117523) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 40920 | ||
| NIIN : 012117523 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number E998-808-5 B-A, that of which is listed with the description Bearing Ball Duplex; Manufactured by Mpb Corporation and listed alongside the NSN 3110012117523, part number E998-808-5 B-A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-211-7523 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 012117523 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| E998-808-5 B-A | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.2030 INCHES MINIMUM AND 0.2350 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.234301 INCHES MINIMUM AND 0.234350 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.406151 INCHES MINIMUM AND 0.406200 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| CTHQ | BEARING PRELOAD RATING | 1.75 POUNDS MINIMUM AND 2.25 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 5.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | CONSISTS OF ONE BEARING WITHOUT A FLANGE AND ONE BEARING WITH A FLANGE,FLANGE 0.4360 IN. MIN AND 0.4370 IN. MAX DIA,0.0220 IN. MIN AND 0.0230 IN. MAX W |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | 639AS3195 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE BALL |
| SFTT | SURFACE TREATMENT | PASSIVATE INNER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTER RING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
