| Part Number : IELK-11-1-62-15.0-A-01-V | Manufacturer : Sensata Technologies Inc | ||
| NSN : 5925-01-524-3486 (5925015243486) | |||
| Item Name : Circuitbreaker | CAGE Code : 81541 | ||
| NIIN : 01-524-3486 (015243486) | |||
| FSC Code : 5925 Circuit Breakers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 00136 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: IELK1116215.0A01V | |||
Thank you for taking an interest in part number IELK-11-1-62-15.0-A-01-V, that of which is listed with the description Circuitbreaker; Manufactured by Sensata Technologies Inc and listed alongside the NSN 5925015243486, part number IELK-11-1-62-15.0-A-01-V is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : IELK-11-1-62-15.0-A-01-V | Manufacturer : Sensata Technologies Inc | ||
| NSN Number : 5925-01-524-3486 (5925015243486) | |||
| Item Name : Circuitbreaker | CAGE Code : 81541 | ||
| NIIN : 015243486 | |||
| FSC CODE : 5925 Circuit Breakers | |||
Thank you for taking an interest in part number IELK-11-1-62-15.0-A-01-V, that of which is listed with the description Circuitbreaker; Manufactured by Sensata Technologies Inc and listed alongside the NSN 5925015243486, part number IELK-11-1-62-15.0-A-01-V is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 3.0 MILLIMETERS |
| CPRQ | RESET METHOD | MANUAL |
| CQQR | THREAD PITCH IN MILLIMETERS | 1.00 |
| AGAV | III END ITEM IDENTIFICATION | SEA DART MISSILE TEST EQUIPMENT |
| AKPX | POLE QUANTITY | 2 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.750 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.859 INCHES NOMINAL |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 15.0 AMPERES AC ALL LOCATIONS |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC ALL LOCATIONS |
| AAQL | BODY STYLE | MULTIPOLE-SINGLE ACTUATOR TYPE |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 ALL LOCATIONS |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 ALL LOCATIONS |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.940 INCHES NOMINAL |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 250.0 AC ALL LOCATIONS |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.750 INCHES NOMINAL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 1 TOGGLE |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 THREADED STUD |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 10.000 MINIMUM AT 125 PCT AND 120.000 MAXIMUM AT 125 PCT ALL LOCATIONS |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 2000.0 AC ALL LOCATIONS |
| CPRX | ACTUATOR POSITION DESIGNATION | BETWEEN POLE ONE AND TWO |
| AJEC | BOSS HEIGHT | 0.140 INCHES NOMINAL |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS |
| ADTV | CASE MATERIAL | METAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.404 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | ISO M |
| ADAQ | BODY LENGTH | 2.490 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.060 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
