| Part Number : ABE7S08S2B1 | Manufacturer : Schneider Electric | |
| Description : sub-base - soldered solid state output relay abe7 - 8 outputs - 2 a | ||
| Main Category : accessories | ||
When your operations require quality Sub-Base - Soldered Solid State Output Relay Abe7 - 8 Outputs - 2 A electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number ABE7S08S2B1 by Schneider Electric and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number ABE7S08S2B1 by Schneider Electric. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number ABE7S08S2B1 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| [Us] rated supply volt- | 24 V DC (preactuator end) |
| age | 24 V DC (PLC end) |
| Circuit breaker threshold | >= 2.6 A |
| Current per channel | 2 A (preactuator end) |
| Current per output common | <= 10 A |
| Current state 0 guaranteed | 0.4 mA (PLC end) |
| Current state 1 guaranteed | 3.1 mA (PLC end) |
| Drop-out voltage | <= 0.5 V (preactuator end) |
| Fault indication | Yes |
| Fault type | Overload |
| Fixing mode | By screws on solid plate with fixing kit |
| Installation category | II conforming to IEC 60664-1 |
| Isolation PLC/operative part | No |
| Manufacturer | Schneider Electric |
| Maximum switching current | 2000 mA DC-12 |
| Minimum switching current | 1 mA |
| Number of channels | 8 |
| Number of terminal per channel | 2 |
| Part Number | ABE7S08S2B1 |
| Product or component type | Solid state output relay sub-base |
| Range of product | Advantys Telefast ABE7 |
| Relay type | Soldered solid state relay |
| Residual current | <= 0.5 mA (preactuator end) |
| Response time | <= 0.1 ms from state 0 to 1 |
| Switchable inductive energy L/R | <= 1700 (U.I) ms |
| Switching frequency | < 0.5/LI² Hz |
| Terminal block type | Removable |
| Tightening torque | 5.31 lbf.in (0.6 N.m) (withflat Ø 3.5 mm |
| Type | Accessories |
| Voltage state 0 guaranteed | 3.4 V (PLC end) |
| Voltage state1 guaranteed | 16.9 V (PLC end) |
| Warranty | 2 Year |
| Width | 206 mm |
| Part Number : ABE7S08S2B1 | Manufacturer : Schneider Electric | |
| Description : sub-base - soldered solid state output relay abe7 - 8 outputs - 2 a | ||
| Main Category : accessories | ||
When your operations require quality Sub-Base - Soldered Solid State Output Relay Abe7 - 8 Outputs - 2 A electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number ABE7S08S2B1 by Schneider Electric and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number ABE7S08S2B1 by Schneider Electric. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number ABE7S08S2B1 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
