| Part Number : DF-G2-KD-Q7 | Manufacturer : Banner | |
| Description : banner fibre amplifier 1100 mm, pnp, push pull output io-link, 960 mw, ip50, 10 ? 30 v dc | ||
| Main Category : automation & control gear | ||
| Category : sensors | ||
| Sub Category : fibre optic sensors | ||
| Alternate P/N: DFG2KDQ7 | ||
When your operations require quality Banner Fibre Amplifier 1100 Mm, Pnp, Push Pull Output Io-Link, 960 Mw, Ip50, 10 ? 30 V Dc electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number DF-G2-KD-Q7 by Banner and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Sensors electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number DF-G2-KD-Q7 by Banner. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number DF-G2-KD-Q7 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Communication Protocol | IO-LINK |
| Depth | 31.5mm |
| Detection Range | 1100 mm |
| Dimensions | 86.3 x 10 x 31.5 mm |
| Electrical Connection | 4-Wire |
| Housing Material | Thermoplastic |
| Interface | IO-Link |
| IP Rating | IP50 |
| Length | 86.3mm |
| Light Source | Red LED |
| Maximum Operating Temperature | +55?C |
| Minimum Operating Temperature | -10?C |
| Mounting Type | DIN Rail |
| Output Type | PNP, Push Pull |
| Power Consumption | 960 mW |
| Response Time | 1000 (Long Range) ?s, 2000 (Long Range with Immunity) ?s, 250 (Standard) ?s, 50 (Fast) ?s, 500 (Medium Range) ?s |
| Standards Met | CE Certified, cULus Listed |
| Supply Voltage | 10 ? 30 V dc |
| Terminal Type | Cable |
| Width | 10mm |
| Part Number : DF-G2-KD-Q7 | Manufacturer : Banner | |
| Description : banner fibre amplifier 1100 mm, pnp, push pull output io-link, 960 mw, ip50, 10 ? 30 v dc | ||
| Main Category : automation & control gear | ||
| Category : sensors | ||
| Sub Category : fibre optic sensors | ||
When your operations require quality Banner Fibre Amplifier 1100 Mm, Pnp, Push Pull Output Io-Link, 960 Mw, Ip50, 10 ? 30 V Dc electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number DF-G2-KD-Q7 by Banner and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Sensors electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number DF-G2-KD-Q7 by Banner. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number DF-G2-KD-Q7 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
