| Part Number : TSXCAY42C | Manufacturer : Schneider Electric | |
| Description : motion control modules - for servomotors - 8 ms.10 s - 4 axes | ||
| Main Category : controllers | ||
When your operations require quality Motion Control Modules - For Servomotors - 8 Ms.10 S - 4 Axes electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TSXCAY42C by Schneider Electric and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TSXCAY42C by Schneider Electric. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TSXCAY42C with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Acceleration time | 8 ms...10 s |
| Acquisition speed | <= 270000 points/mn |
| Analogue output range | +/- 10...24 V |
| Analogue output resolution | 13 bits + sign |
| Checks | Consistency of commands |
| Clock frequency | 200 kHz SSI absolute encoder |
| Current consumption | 22...40 mA 24 V DC on 10/30 V absolute encoder module |
| Current state 0 guaranteed | < 1.5 mA servo drive control input |
| Current state 1 guaranteed | > 3.5 mA servo drive control input |
| Electrical connection | 1 connector SUB-D 9 for an analogue output (speed reference) |
| Function of module | Servo drive offset correction |
| I/O modularity | 4 axes |
| Incremental encoder | 500 kHz frequency x1 |
| Incremental encoder frequency x 4 | 250 kHz in input |
| Input compatibility | Absolute encoder parallel output ABE7CPA11 |
| Input impedance | 270 Ohm counter input |
| Input logic | Positive |
| Input type | Current sink auxiliary input EN/IEC 1131 Type 2 |
| Input voltage | 5 V 18 mA counter input |
| Input voltage limits | 19...30 V servo drive control input |
| Leakage current | < 0.3 mA reflex output |
| Length of axis | 256...32000000 P |
| Local signalling | 1 LED green module operating (RUN) |
| LSB value | 1.25 mV analogue output |
| Manufacturer | Schneider Electric |
| Maximum output current | 1.5 mA analogue output |
| Minimum load | 1 mA 1 V |
| Model # | TSX-CAY-42C |
| Module format | Double |
| Nominal output current | 0.5 A reflex output |
| Number of outputs | 4 analogue output static |
| Operating mode | FOLLOWER |
| Output compatibility | Positive logic DC inputs (resistance <= 15 kOhm) reflex |
| Output overload protection | Current limiter reflex output |
| Output overvoltage protection | Zener diode between outputs and 24 DC reflex output |
| Output voltage | 24 V DC servo drive validation |
| Output voltage limits | 5...30 V servo drive validation |
| Part Number | TSXCAY42C |
| Power dissipation in W | 10...17 W |
| Product or component type | Motion control modules |
| Product specific application | For servomotors |
| Range of product | Modicon Premium Automation platform |
| Resolution | <= 1000 position units per point |
| Reverse polarity protection | Reverse diode on supply reflex output |
| Servo loop type | Proportional to overshoot compensation and gain switching 4 ms |
| Short-circuit protection | Current limiter reflex output |
| Speed profile path | Trapezoidal or parabolic |
| Switching time | < 500 µs for reflex output |
| Type | Controllers |
| Type of axis | Following axis dynamic ratio |
| Voltage drop | < 1 V at state on reflex output |
| Voltage state 0 guaranteed | ≤ 1.2 V counter input |
| Voltage state 1 guaranteed | ≥ 11 V servo drive control input |
| Warranty | 2 Year |
| Part Number : TSXCAY42C | Manufacturer : Schneider Electric | |
| Description : motion control modules - for servomotors - 8 ms.10 s - 4 axes | ||
| Main Category : controllers | ||
When your operations require quality Motion Control Modules - For Servomotors - 8 Ms.10 S - 4 Axes electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TSXCAY42C by Schneider Electric and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TSXCAY42C by Schneider Electric. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TSXCAY42C with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
