| Part Number : A216132A2NZNBE | Manufacturer : C & K Components Inc | |
| Description : keylock switch, 4 positions, dpst, solder lug terminal, keylock actuator, panel mount | ||
| Main Category : electromechanicals | ||
| Category : switches | ||
| Sub Category : keylock switches | ||
When your operations require quality Keylock Switch, 4 Positions, Dpst, Solder Lug Terminal, Keylock Actuator, Panel Mount electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number A216132A2NZNBE by C & K Components Inc and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number A216132A2NZNBE by C & K Components Inc. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number A216132A2NZNBE with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Actuator Length | 0.25 inch |
| Actuator Material | ZINC ALLOY |
| Actuator Type | KEYLOCK |
| Body Height | 19.4564 mm |
| Body Length or Diameter | 26.1874 mm |
| Bushing Length | 0.27 inch |
| Bushing Type | 3/4-24 |
| Center Contact Material | COPPER ALLOY |
| Center Contact Plating | GOLD OVER NICKEL |
| Contact AC Max Power Rating R Load | 0.4VA@20VAC |
| Contact Resistance | 0.02 mohm |
| Contact Timing | BREAK-BEFORE-MAKE |
| Dielectric Withstand Volts | 1000VRMS V |
| Electrical Life | 15000 Cycle(s) |
| End Contact Material | BRASS |
| End Contact Plating | GOLD OVER NICKEL |
| Housing Material | GLASS FILLED NYLON |
| Indexing Angle | 30 deg |
| Insulation Resistance | 1000000000 ohm |
| JESD-609 Code | e4 |
| Mounting Feature | PANEL MOUNT |
| Number of Positions | 4 |
| Operating Temperature-Max | 85 Cel |
| Operating Temperature-Min | -30 Cel |
| Sealing | EPOXY |
| Switch Function | DPST |
| Switch Type | KEYLOCK SWITCH |
| Terminal Finish | Gold (Au) - with Nickel (Ni) barrier |
| Terminal Length | 0.25 inch |
| Terminal Material | BRASS |
| Termination Type | SOLDER LUG |
| Part Number : A216132A2NZNBE | Manufacturer : C & K Components Inc | |
| Description : keylock switch, 4 positions, dpst, solder lug terminal, keylock actuator, panel mount | ||
| Main Category : electromechanicals | ||
| Category : switches | ||
| Sub Category : keylock switches | ||
When your operations require quality Keylock Switch, 4 Positions, Dpst, Solder Lug Terminal, Keylock Actuator, Panel Mount electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number A216132A2NZNBE by C & K Components Inc and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number A216132A2NZNBE by C & K Components Inc. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number A216132A2NZNBE with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
