| Part Number : MJTP1122 | Manufacturer : Apem Components, Inc. | |
| Description : tactile switches sw tac spst 50ma 12vdc 6mm smd | ||
| Main Category : semiconductors | ||
| Category : optoelectronics | ||
| Sub Category : visible leds | ||
When your operations require quality Tactile Switches Sw Tac Spst 50Ma 12Vdc 6Mm Smd electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number MJTP1122 by Apem Components, Inc. and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Optoelectronics electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number MJTP1122 by Apem Components, Inc.. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number MJTP1122 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Body Length or Diameter | 6.2 mm |
| Actuator Angle | 0 deg |
| Operating Temperature-Min | -20 Cel |
| Switch Action | MOMENTARY-TACTILE |
| Terminal Material | BRASS |
| Termination Type | SOLDER |
| Mounting Feature | SURFACE MOUNT-STRAIGHT |
| Contact DC Max Rating R Load | .05A@12VDC |
| Actuator Length | 0.02 inch |
| Contact Bounce Time-Max | 10 ms |
| Operating Force-Max | 1.86 N |
| Actuator Type | PLUNGER TYPE |
| Insulation Resistance | 100000000 ohm |
| Dielectric Withstand Volts | 250VAC V |
| Actuator Material | NYLON |
| Switch Function | SPST |
| Electrical Life | 100000 Cycle(s) |
| Number of Switches | 1 |
| Body Breadth | 6.2 inch |
| Packing Method | BULK |
| Contact Resistance | 0.1 mohm |
| Contact Voltage(DC)-Max | 12 V |
| Terminal Finish | Silver (Ag) |
| JESD-609 Code | e4 |
| Center Contact Plating | SILVER |
| Manufacturer Series | MJTP |
| End Contact Plating | SILVER |
| Switch Type | KEYPAD SWITCH |
| Additional Feature | TAPE/REEL PKG AVAILABLE |
| Housing Material | NYLON |
| Operating Temperature-Max | 70 Cel |
| Circuit Configuration | 1X1 |
| Sealing | MOLDED |
| Body Height | 2.6 mm |
| Contact Current(DC)-Max | 0.05 A |
| Part Number : MJTP1122 | Manufacturer : Apem Components, Inc. | |
| Description : tactile switches sw tac spst 50ma 12vdc 6mm smd | ||
| Main Category : semiconductors | ||
| Category : optoelectronics | ||
| Sub Category : visible leds | ||
When your operations require quality Tactile Switches Sw Tac Spst 50Ma 12Vdc 6Mm Smd electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number MJTP1122 by Apem Components, Inc. and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Optoelectronics electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number MJTP1122 by Apem Components, Inc.. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number MJTP1122 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
