When your operations require quality Enabling Foot Switch With Cover. The Enable Foot Switch Provides Two Enabling Contacts And One Signaling Contact And Is Available With Or Without Latch. If The Pedal Is Pressed Up To Pressure Point, The Two Enable Contacts Are Closed. If The Pedal Is Released, The Enable Contacts Are Open Again. If The Pedal Is Pressed Past The Pressure Point, To The Bottom Position, The Positive Opening Action Enabling Contacts Are Opened. When The Pedal Is Released From The Bottom Position, The Enabling Contacts Remain Open Through The Center Position To The Top. For The Application Of An Enable Device, The Rules For Din En Iso 12100 And Din En 60204-1 Apply. The Programmable Signaling Contact Can Be Used To Indicate A Fixed Position, With A Pnp Output. By Combining Both Outputs You Can Determine If The Actuation Position Was Made Withthe Top Position- The Off Position Of The Enable Contacts (The Actuator Is Not Pressed) - Or The Bottom Position - The Off Position Of The Operating Contacts (The Actuator Is Fully Pressed) electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number 606-1000-558 by Altech Corp and/or any other component within our ready-to-purchase catalogs.

At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Safety Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number 606-1000-558 by Altech Corp. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number 606-1000-558 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!