| Part Number : MJTP1122 | Manufacturer : Apem | |
| Description : tactile switches sw tac spst 50ma 12vdc 6mm smd | ||
| Main Category : switches | ||
| Category : tactile switches | ||
When your operations require quality Tactile Switches Sw Tac Spst 50Ma 12Vdc 6Mm Smd electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number MJTP1122 by Apem and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Tactile Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number MJTP1122 by Apem. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number MJTP1122 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Actuator Angle | 0 deg |
| Actuator Length | 0.02 inch |
| Actuator Material | NYLON |
| Actuator Type | PLUNGER TYPE |
| Additional Feature | TAPE/REEL PKG AVAILABLE |
| Body Breadth | 6.2 inch |
| Body Height | 2.6 mm |
| Body Length or Diameter | 6.2 mm |
| Center Contact Plating | SILVER |
| Circuit Configuration | 1X1 |
| Contact Bounce Time-Max | 10 ms |
| Contact Current(DC)-Max | 0.05 A |
| Contact DC Max Rating R Load | .05A@12VDC |
| Contact Resistance | 0.1 mohm |
| Contact Voltage(DC)-Max | 12 V |
| Dielectric Withstand Volts | 250VAC V |
| Electrical Life | 100000 Cycle(s) |
| End Contact Plating | SILVER |
| Housing Material | NYLON |
| Insulation Resistance | 100000000 ohm |
| JESD-609 Code | e4 |
| Manufacturer Series | MJTP |
| Mounting Feature | SURFACE MOUNT-STRAIGHT |
| Number of Switches | 1 |
| Operating Force-Max | 1.86 N |
| Operating Temperature-Max | 70 Cel |
| Operating Temperature-Min | -20 Cel |
| Packing Method | BULK |
| Sealing | MOLDED |
| Switch Action | MOMENTARY-TACTILE |
| Switch Function | SPST |
| Switch Type | KEYPAD SWITCH |
| Terminal Finish | Silver (Ag) |
| Terminal Material | BRASS |
| Termination Type | SOLDER |
| Part Number : MJTP1122 | Manufacturer : Apem | |
| Description : tactile switches sw tac spst 50ma 12vdc 6mm smd | ||
| Main Category : switches | ||
| Category : tactile switches | ||
When your operations require quality Tactile Switches Sw Tac Spst 50Ma 12Vdc 6Mm Smd electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number MJTP1122 by Apem and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Tactile Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number MJTP1122 by Apem. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number MJTP1122 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
