| Part Number : EP11S2D1CSE | Manufacturer : C&K | |
| Description : pushbutton switches pushbutton | ||
| Main Category : switches | ||
| Category : pushbutton switches | ||
When your operations require quality Pushbutton Switches Pushbutton electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number EP11S2D1CSE by C&K and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Pushbutton Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number EP11S2D1CSE by C&K. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number EP11S2D1CSE with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Actuator Length | 0.465 inch |
| Actuator Type | PLUNGER |
| Body Breadth | 5.08 inch |
| Body Height | 8.89 mm |
| Body Length or Diameter | 8.13 mm |
| Bushing Length | 0.177 inch |
| Center Contact Material | COPPER ALLOY |
| Center Contact Plating | SILVER |
| Contact AC Max Rating R Load | 1A@120VAC |
| Contact Current(AC)-Max | 1 A |
| Contact Current(DC)-Max | 1 A |
| Contact DC Max Rating R Load | 1A@28VDC |
| Contact Resistance | 0.02 mohm |
| Contact Voltage(AC)-Max | 120 V |
| Contact Voltage(DC)-Max | 28 V |
| Dielectric Withstand Volts | 1000VRMS V |
| Electrical Life | 60000 Cycle(s) |
| End Contact Material | COIN SILVER |
| End Contact Plating | SILVER |
| Housing Material | GLASS FILLED NYLON |
| Insulation Resistance | 1000000000 ohm |
| Insulator Material | GLASS FILLED NYLON |
| JESD-609 Code | e3 |
| Mounting Feature | THROUGH HOLE-STRAIGHT |
| Operating Temperature-Max | 85 Cel |
| Operating Temperature-Min | -30 Cel |
| Sealing | EPOXY TERMINAL SEALED |
| Solderability | MIL-STD |
| Switch Action | MOMENTARY |
| Switch Function | SPST |
| Switch Type | PUSHBUTTON SWITCH |
| Terminal Finish | MATTE TIN OVER NICKEL |
| Terminal Material | COPPER ALLOY |
| Termination Type | SOLDER |
| Part Number : EP11S2D1CSE | Manufacturer : C&K | |
| Description : pushbutton switches pushbutton | ||
| Main Category : switches | ||
| Category : pushbutton switches | ||
When your operations require quality Pushbutton Switches Pushbutton electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number EP11S2D1CSE by C&K and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Pushbutton Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number EP11S2D1CSE by C&K. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number EP11S2D1CSE with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
