Part Number : TMP1-1 | Manufacturer : Knitter-Switch | |
Description : tactile switches spst 7.60mm x 7.60mm 0.80mm 20ma @ 50vdc through hole rohs | ||
Main Category : switches | ||
Category : tactile switches | ||
Alternate P/N: TMP11 |
When your operations require quality Tactile Switches Spst 7.60Mm X 7.60Mm 0.80Mm 20Ma @ 50Vdc Through Hole Rohs electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TMP1-1 by Knitter-Switch and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Tactile Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TMP1-1 by Knitter-Switch. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TMP1-1 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
Actuator Travel | 0.45 mm |
Contact DC Max Rating R Load | 0.02A@50VDC |
Actuator Angle | 0 deg |
Actuator Type | KEYPAD |
Insulation Resistance | 1000000000 ohm |
Contact Voltage(DC)-Max | 50 V |
Operating Temperature-Min | -40 Cel |
Contact Current(DC)-Max | 0.02 A |
Operating Temperature-Max | 85 Cel |
Terminal Material | BRASS |
Number of Switches | 1 |
Switch Action | MOMENTARY |
Mounting Feature | THROUGH HOLE-STRAIGHT |
Center Contact Material | STAINLESS STEEL |
Switch Function | SPST |
Sealing | IP67 |
Circuit Configuration | 1X1 |
Contact Resistance | 0.1 mohm |
Actuator Color | IVORY |
Dielectric Withstand Volts | 250VAC V |
Switch Type | KEYPAD SWITCH |
Center Contact Plating | GOLD OVER NICKEL |
Body Height | 4.1 mm |
Actuator Length | 0.031 inch |
End Contact Plating | GOLD OVER NICKEL |
PCB Hole Count | 4 |
Body Length or Diameter | 7.6 mm |
Termination Type | SOLDER |
Terminal Length | 0.144 inch |
Actuator Material | SILICON RUBBER |
Operating Force-Max | 5.5 N |
Body Breadth | 7.6 inch |
End Contact Material | STAINLESS STEEL |
Body Color | BLUE |
Insulator Material | THERMOPLASTIC |
Part Number : TMP1-1 | Manufacturer : Knitter-Switch | |
Description : tactile switches spst 7.60mm x 7.60mm 0.80mm 20ma @ 50vdc through hole rohs | ||
Main Category : switches | ||
Category : tactile switches |
When your operations require quality Tactile Switches Spst 7.60Mm X 7.60Mm 0.80Mm 20Ma @ 50Vdc Through Hole Rohs electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TMP1-1 by Knitter-Switch and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Tactile Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TMP1-1 by Knitter-Switch. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TMP1-1 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote