| Part Number : TMP1-R | Manufacturer : Knitter-Switch | |
| Description : tactile switches spst 0.80mm 20ma @ 24vdc through hole rohs | ||
| Main Category : switches | ||
| Category : tactile switches | ||
| Alternate P/N: TMP1R | ||
When your operations require quality Tactile Switches Spst 0.80Mm 20Ma @ 24Vdc Through Hole Rohs electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TMP1-R by Knitter-Switch and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Tactile Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TMP1-R by Knitter-Switch. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TMP1-R with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| End Contact Material | STAINLESS STEEL |
| Insulator Material | THERMOPLASTIC |
| Center Contact Material | STAINLESS STEEL |
| Body Height | 7.6 mm |
| Contact DC Max Rating R Load | 0.02A@50VDC |
| End Contact Plating | GOLD OVER NICKEL |
| Actuator Material | SILICON RUBBER |
| Insulation Resistance | 1000000000 ohm |
| Switch Type | KEYPAD SWITCH |
| Sealing | IP67 |
| Actuator Color | IVORY |
| Body Color | BLUE |
| Number of Switches | 1 |
| Terminal Material | BRASS |
| Operating Force-Max | 5.5 N |
| Contact Voltage(DC)-Max | 24 V |
| Body Breadth | 6.93 inch |
| Termination Type | SOLDER |
| PCB Hole Count | 4 |
| Switch Function | SPST |
| Switch Action | MOMENTARY |
| Terminal Length | 0.144 inch |
| Dielectric Withstand Volts | 250VAC V |
| Circuit Configuration | 1X1 |
| Contact Current(DC)-Max | 0.02 A |
| Operating Temperature-Min | -40 Cel |
| Contact Resistance | 0.1 mohm |
| Actuator Travel | 0.45 mm |
| Body Length or Diameter | 7.6 mm |
| Mounting Feature | THROUGH HOLE-RIGHT ANGLE |
| Actuator Type | KEYPAD |
| Actuator Angle | 0 deg |
| Operating Temperature-Max | 85 Cel |
| Center Contact Plating | GOLD OVER NICKEL |
| Part Number : TMP1-R | Manufacturer : Knitter-Switch | |
| Description : tactile switches spst 0.80mm 20ma @ 24vdc through hole rohs | ||
| Main Category : switches | ||
| Category : tactile switches | ||
When your operations require quality Tactile Switches Spst 0.80Mm 20Ma @ 24Vdc Through Hole Rohs electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TMP1-R by Knitter-Switch and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Tactile Switches electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TMP1-R by Knitter-Switch. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TMP1-R with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
