| Part Number : TP-102-02-T | Manufacturer : Components Corp | |
| Description : the tp-102 series of printed circuit mounted, test point jumpers provides a significantly lower cost and superior function to that of conventional "turret" type terminals in board level, "trouble shooting" applications. with only two part number types, the tp-102 series covers the complete range of hole diameters most commonly employed for "turret" terminals; the need for costly re-design of circuit board art work is eliminated. spring tempered, flared leads allow sufficient tension positioning in the hole during wave soldering, thereby eliminating the costly staking or secondary soldering operations normally encountered with "turret" terminals. the unique loop profile of the tp-102 series offers a superior and positive anchor for commonly used, spring loaded test probes and clips. the economies and single hole mounting requirement of this design permit greater numbers of test point locations in p.c. board applications at much less expense than previously used "turret" terminals. the tp-102 series devices are formed from phosphor bronze alloy wire. due to the spring temper and flared lead design, only two styles are necessary to cover mounting hole diameters from .067" to .078" and .112" to .116". | ||
| Main Category : test and measurement | ||
| Category : test equipment | ||
| Sub Category : through hole mount test points | ||
| Alternate P/N: TP10202T | ||
When your operations require quality The Tp-102 Series Of Printed Circuit Mounted, Test Point Jumpers Provides A Significantly Lower Cost And Superior Function To That Of Conventional "Turret" Type Terminals In Board Level, "Trouble Shooting" Applications. With Only Two Part Number Types, The Tp-102 Series Covers The Complete Range Of Hole Diameters Most Commonly Employed For "Turret" Terminals; The Need For Costly Re-Design Of Circuit Board Art Work Is Eliminated. Spring Tempered, Flared Leads Allow Sufficient Tension Positioning In The Hole During Wave Soldering, Thereby Eliminating The Costly Staking Or Secondary Soldering Operations Normally Encountered With "Turret" Terminals. The Unique Loop Profile Of The Tp-102 Series Offers A Superior And Positive Anchor For Commonly Used, Spring Loaded Test Probes And Clips. The Economies And Single Hole Mounting Requirement Of This Design Permit Greater Numbers Of Test Point Locations In P.C. Board Applications At Much Less Expense Than Previously Used "Turret" Terminals. The Tp-102 Series Devices Are Formed From Phosphor Bronze Alloy Wire. Due To The Spring Temper And Flared Lead Design, Only Two Styles Are Necessary To Cover Mounting Hole Diameters From .067" To .078" And .112" To .116". electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TP-102-02-T by Components Corp and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Test Equipment electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TP-102-02-T by Components Corp. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TP-102-02-T with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Part Number : TP-102-02-T | Manufacturer : Components Corp | |
| Description : the tp-102 series of printed circuit mounted, test point jumpers provides a significantly lower cost and superior function to that of conventional "turret" type terminals in board level, "trouble shooting" applications. with only two part number types, the tp-102 series covers the complete range of hole diameters most commonly employed for "turret" terminals; the need for costly re-design of circuit board art work is eliminated. spring tempered, flared leads allow sufficient tension positioning in the hole during wave soldering, thereby eliminating the costly staking or secondary soldering operations normally encountered with "turret" terminals. the unique loop profile of the tp-102 series offers a superior and positive anchor for commonly used, spring loaded test probes and clips. the economies and single hole mounting requirement of this design permit greater numbers of test point locations in p.c. board applications at much less expense than previously used "turret" terminals. the tp-102 series devices are formed from phosphor bronze alloy wire. due to the spring temper and flared lead design, only two styles are necessary to cover mounting hole diameters from .067" to .078" and .112" to .116". | ||
| Main Category : test and measurement | ||
| Category : test equipment | ||
| Sub Category : through hole mount test points | ||
When your operations require quality The Tp-102 Series Of Printed Circuit Mounted, Test Point Jumpers Provides A Significantly Lower Cost And Superior Function To That Of Conventional "Turret" Type Terminals In Board Level, "Trouble Shooting" Applications. With Only Two Part Number Types, The Tp-102 Series Covers The Complete Range Of Hole Diameters Most Commonly Employed For "Turret" Terminals; The Need For Costly Re-Design Of Circuit Board Art Work Is Eliminated. Spring Tempered, Flared Leads Allow Sufficient Tension Positioning In The Hole During Wave Soldering, Thereby Eliminating The Costly Staking Or Secondary Soldering Operations Normally Encountered With "Turret" Terminals. The Unique Loop Profile Of The Tp-102 Series Offers A Superior And Positive Anchor For Commonly Used, Spring Loaded Test Probes And Clips. The Economies And Single Hole Mounting Requirement Of This Design Permit Greater Numbers Of Test Point Locations In P.C. Board Applications At Much Less Expense Than Previously Used "Turret" Terminals. The Tp-102 Series Devices Are Formed From Phosphor Bronze Alloy Wire. Due To The Spring Temper And Flared Lead Design, Only Two Styles Are Necessary To Cover Mounting Hole Diameters From .067" To .078" And .112" To .116". electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TP-102-02-T by Components Corp and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Test Equipment electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TP-102-02-T by Components Corp. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TP-102-02-T with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
