| Part Number : TRD11D10WL | Manufacturer : Raychem (Te-Connectivity) | |
| Main Category : uncategorized products | ||
When your operations require quality electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TRD11D10WL by Raychem (Te-Connectivity) and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TRD11D10WL by Raychem (Te-Connectivity). We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TRD11D10WL with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Actuator Angle | 23 deg |
| Actuator Color | BLACK |
| Actuator Length | 0.508 inch |
| Actuator Material | THERMOPLASTIC |
| Actuator Type | ROCKER |
| Body Breadth | 13.97 inch |
| Body Color | BLACK |
| Body Height | 9.53 mm |
| Body Length or Diameter | 19.1 mm |
| Center Contact Plating | GOLD |
| Contact Current(AC)-Max | 0.4 A |
| Contact Current(DC)-Max | 0.4 A |
| Contact DC Max Power Rating R Load | 0.4VA@20VDC |
| Contact DC Max Rating R Load | .02A@20VDC |
| Contact Function | ON-ON |
| Contact Resistance | 0.05 mohm |
| Contact Timing | BREAK-BEFORE-MAKE |
| Contact Voltage(AC)-Max | 20 V |
| Contact Voltage(DC)-Max | 20 V |
| Dielectric Withstand Volts | 1500VRMS V |
| Electrical Life | 100000 Cycle(s) |
| End Contact Plating | GOLD OVER NICKEL |
| Insulation Resistance | 1000000000 ohm |
| Insulator Material | THERMOPLASTIC |
| JESD-609 Code | e4 |
| Mounting Feature | PANEL MOUNT |
| Operating Temperature-Max | 80 Cel |
| Operating Temperature-Min | -20 Cel |
| Sealing | EPOXY TERMINAL SEALED |
| Solderability | WAVE |
| Switch Action | LATCHED |
| Switch Function | SPDT |
| Switch Type | ROCKER SWITCH |
| Terminal Finish | Gold (Au) |
| Terminal Length | 0.13 inch |
| Termination Type | WIRE |
| Washability | SOLVENT |
| Part Number : TRD11D10WL | Manufacturer : Raychem (Te-Connectivity) | |
| Main Category : uncategorized products | ||
When your operations require quality electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number TRD11D10WL by Raychem (Te-Connectivity) and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number TRD11D10WL by Raychem (Te-Connectivity). We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number TRD11D10WL with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
