| Part Number : 80611265754 | Manufacturer : 3M | |
| Description : 3m™ cold shrink branch splice qs-2001b lets you easily splice and tap extruded dielectric power cables rated up to 15kv. this silicone rubber splice provides economical, effective installations without force pushing, pulling or heat (torch) of traditional splices.since 3m™ invented it more than 30 years ago, cold shrink technology has been proven reliable by field use and laboratory testing. it offers interfacial pressure superior to that of push-on and heat shrink splices.the 3m™ cold shrink branch splice qs-2001b kit connects medium-voltage cables including cross-linked polyethylene (xlpe) and ethylene propylene rubber (epr), metallic wire, tape shield or jcn and plastic jacket. the set-screw connector in the qs-2001b kit adapts to a range of cable sizes. the 3m™ cold shrink branch splice qs-2001b can be used as an aerial splice, on cable trays or in direct burial applications. it is available with an adapter kit for splicing with cables of smaller diameter.this factory-tested splice meets requirements specified in the ieee-404 standard.insulation outside diameter range:· 1.00 - 1.35 inch, 0.63 - 1.01 inch (with qs2000ba accessory)· 25.4 - 34.29 mm, 16.26 - 25.65 mm (with qs2000ba accessory) | ||
| Main Category : wire and cable | ||
| Category : protectors and insulators | ||
| Sub Category : qsiii and qs-2000 splices | ||
When your operations require quality 3M™ Cold Shrink Branch Splice Qs-2001B Lets You Easily Splice And Tap Extruded Dielectric Power Cables Rated Up To 15Kv. This Silicone Rubber Splice Provides Economical, Effective Installations Without Force Pushing, Pulling Or Heat (Torch) Of Traditional Splices.Since 3M™ Invented It More Than 30 Years Ago, Cold Shrink Technology Has Been Proven Reliable By Field Use And Laboratory Testing. It Offers Interfacial Pressure Superior To That Of Push-On And Heat Shrink Splices.The 3M™ Cold Shrink Branch Splice Qs-2001B Kit Connects Medium-Voltage Cables Including Cross-Linked Polyethylene (Xlpe) And Ethylene Propylene Rubber (Epr), Metallic Wire, Tape Shield Or Jcn And Plastic Jacket. The Set-Screw Connector In The Qs-2001B Kit Adapts To A Range Of Cable Sizes. The 3M™ Cold Shrink Branch Splice Qs-2001B Can Be Used As An Aerial Splice, On Cable Trays Or In Direct Burial Applications. It Is Available With An Adapter Kit For Splicing With Cables Of Smaller Diameter.This Factory-Tested Splice Meets Requirements Specified In The Ieee-404 Standard.Insulation Outside Diameter Range:· 1.00 - 1.35 Inch, 0.63 - 1.01 Inch (With Qs2000ba Accessory)· 25.4 - 34.29 Mm, 16.26 - 25.65 Mm (With Qs2000ba Accessory) electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number 80611265754 by 3M and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Protectors And Insulators electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number 80611265754 by 3M. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number 80611265754 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Part Number : 80611265754 | Manufacturer : 3M | |
| Description : 3m™ cold shrink branch splice qs-2001b lets you easily splice and tap extruded dielectric power cables rated up to 15kv. this silicone rubber splice provides economical, effective installations without force pushing, pulling or heat (torch) of traditional splices.since 3m™ invented it more than 30 years ago, cold shrink technology has been proven reliable by field use and laboratory testing. it offers interfacial pressure superior to that of push-on and heat shrink splices.the 3m™ cold shrink branch splice qs-2001b kit connects medium-voltage cables including cross-linked polyethylene (xlpe) and ethylene propylene rubber (epr), metallic wire, tape shield or jcn and plastic jacket. the set-screw connector in the qs-2001b kit adapts to a range of cable sizes. the 3m™ cold shrink branch splice qs-2001b can be used as an aerial splice, on cable trays or in direct burial applications. it is available with an adapter kit for splicing with cables of smaller diameter.this factory-tested splice meets requirements specified in the ieee-404 standard.insulation outside diameter range:· 1.00 - 1.35 inch, 0.63 - 1.01 inch (with qs2000ba accessory)· 25.4 - 34.29 mm, 16.26 - 25.65 mm (with qs2000ba accessory) | ||
| Main Category : wire and cable | ||
| Category : protectors and insulators | ||
| Sub Category : qsiii and qs-2000 splices | ||
When your operations require quality 3M™ Cold Shrink Branch Splice Qs-2001B Lets You Easily Splice And Tap Extruded Dielectric Power Cables Rated Up To 15Kv. This Silicone Rubber Splice Provides Economical, Effective Installations Without Force Pushing, Pulling Or Heat (Torch) Of Traditional Splices.Since 3M™ Invented It More Than 30 Years Ago, Cold Shrink Technology Has Been Proven Reliable By Field Use And Laboratory Testing. It Offers Interfacial Pressure Superior To That Of Push-On And Heat Shrink Splices.The 3M™ Cold Shrink Branch Splice Qs-2001B Kit Connects Medium-Voltage Cables Including Cross-Linked Polyethylene (Xlpe) And Ethylene Propylene Rubber (Epr), Metallic Wire, Tape Shield Or Jcn And Plastic Jacket. The Set-Screw Connector In The Qs-2001B Kit Adapts To A Range Of Cable Sizes. The 3M™ Cold Shrink Branch Splice Qs-2001B Can Be Used As An Aerial Splice, On Cable Trays Or In Direct Burial Applications. It Is Available With An Adapter Kit For Splicing With Cables Of Smaller Diameter.This Factory-Tested Splice Meets Requirements Specified In The Ieee-404 Standard.Insulation Outside Diameter Range:· 1.00 - 1.35 Inch, 0.63 - 1.01 Inch (With Qs2000ba Accessory)· 25.4 - 34.29 Mm, 16.26 - 25.65 Mm (With Qs2000ba Accessory) electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number 80611265754 by 3M and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Protectors And Insulators electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number 80611265754 by 3M. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number 80611265754 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
