| Part Number : 80611450448 | Manufacturer : 3M | |
| Description : the 3m™ cold shrink silicone rubber short termination qt-iii, 7621-t-95 kit is designed for terminating (solid) dielectric power cable rated 5-8kv in small spaces. helps meet nec 2005 code for shielded cables of 2,400+ volts. meets ieee standard 48-1996. for primary insulation o.d. of 0.44" to 0.89" and 2-3/0 conductor range for 5kv and 4-2/0 range for 8.7kv.this one-piece, non-skirted silicone rubber termination comes with factory-applied, pre-positioned hi-k stress control layers underneath the insulator. its short installed length is excellent for installations in limited spaces, such as those with motors, starters, switchgear, variable speed drives, transformers and similar connections - often reducing the need to add auxilitary boxes when enclosure space is limited. it`s based on cold shrink technology, field proven over 40 years since 3m™ invented it. designed for a range of cable types including tape shield, wire shield and unishield® constructions. ease of installation and built-in features help reduce risk of craft errors and provide lower total installed cost.conductor size range for· 5 kv: 2-3/0 awg· 8 kv: 4-2/0 awg | ||
| Main Category : wire and cable | ||
| Category : protectors and insulators | ||
| Sub Category : cold shrink terminations | ||
When your operations require quality The 3M™ Cold Shrink Silicone Rubber Short Termination Qt-Iii, 7621-T-95 Kit Is Designed For Terminating (Solid) Dielectric Power Cable Rated 5-8Kv In Small Spaces. Helps Meet Nec 2005 Code For Shielded Cables Of 2,400+ Volts. Meets Ieee Standard 48-1996. For Primary Insulation O.D. Of 0.44" To 0.89" And 2-3/0 Conductor Range For 5Kv And 4-2/0 Range For 8.7Kv.This One-Piece, Non-Skirted Silicone Rubber Termination Comes With Factory-Applied, Pre-Positioned Hi-K Stress Control Layers Underneath The Insulator. Its Short Installed Length Is Excellent For Installations In Limited Spaces, Such As Those With Motors, Starters, Switchgear, Variable Speed Drives, Transformers And Similar Connections - Often Reducing The Need To Add Auxilitary Boxes When Enclosure Space Is Limited. It`S Based On Cold Shrink Technology, Field Proven Over 40 Years Since 3M™ Invented It. Designed For A Range Of Cable Types Including Tape Shield, Wire Shield And Unishield® Constructions. Ease Of Installation And Built-In Features Help Reduce Risk Of Craft Errors And Provide Lower Total Installed Cost.Conductor Size Range For· 5 Kv: 2-3/0 Awg· 8 Kv: 4-2/0 Awg electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number 80611450448 by 3M and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Protectors And Insulators electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number 80611450448 by 3M. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number 80611450448 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
| Part Number : 80611450448 | Manufacturer : 3M | |
| Description : the 3m™ cold shrink silicone rubber short termination qt-iii, 7621-t-95 kit is designed for terminating (solid) dielectric power cable rated 5-8kv in small spaces. helps meet nec 2005 code for shielded cables of 2,400+ volts. meets ieee standard 48-1996. for primary insulation o.d. of 0.44" to 0.89" and 2-3/0 conductor range for 5kv and 4-2/0 range for 8.7kv.this one-piece, non-skirted silicone rubber termination comes with factory-applied, pre-positioned hi-k stress control layers underneath the insulator. its short installed length is excellent for installations in limited spaces, such as those with motors, starters, switchgear, variable speed drives, transformers and similar connections - often reducing the need to add auxilitary boxes when enclosure space is limited. it`s based on cold shrink technology, field proven over 40 years since 3m™ invented it. designed for a range of cable types including tape shield, wire shield and unishield® constructions. ease of installation and built-in features help reduce risk of craft errors and provide lower total installed cost.conductor size range for· 5 kv: 2-3/0 awg· 8 kv: 4-2/0 awg | ||
| Main Category : wire and cable | ||
| Category : protectors and insulators | ||
| Sub Category : cold shrink terminations | ||
When your operations require quality The 3M™ Cold Shrink Silicone Rubber Short Termination Qt-Iii, 7621-T-95 Kit Is Designed For Terminating (Solid) Dielectric Power Cable Rated 5-8Kv In Small Spaces. Helps Meet Nec 2005 Code For Shielded Cables Of 2,400+ Volts. Meets Ieee Standard 48-1996. For Primary Insulation O.D. Of 0.44" To 0.89" And 2-3/0 Conductor Range For 5Kv And 4-2/0 Range For 8.7Kv.This One-Piece, Non-Skirted Silicone Rubber Termination Comes With Factory-Applied, Pre-Positioned Hi-K Stress Control Layers Underneath The Insulator. Its Short Installed Length Is Excellent For Installations In Limited Spaces, Such As Those With Motors, Starters, Switchgear, Variable Speed Drives, Transformers And Similar Connections - Often Reducing The Need To Add Auxilitary Boxes When Enclosure Space Is Limited. It`S Based On Cold Shrink Technology, Field Proven Over 40 Years Since 3M™ Invented It. Designed For A Range Of Cable Types Including Tape Shield, Wire Shield And Unishield® Constructions. Ease Of Installation And Built-In Features Help Reduce Risk Of Craft Errors And Provide Lower Total Installed Cost.Conductor Size Range For· 5 Kv: 2-3/0 Awg· 8 Kv: 4-2/0 Awg electromechanical parts from leading entities that operate with quality at the forefront of their business endeavors, connect with the experts at ASAP Semiconductor. On this page, you can submit a quote request for part number 80611450448 by 3M and/or any other component within our ready-to-purchase catalogs.
At ASAP Semiconductor, we value our customers, so we make it our priority to meet their varying operational parameters with high-quality Protectors And Insulators electromechanicals. That being said, we are more than happy to formulate a competitive solution for part number 80611450448 by 3M. We only ask that you fill out the form below with as much information as you can regarding your needs so that we can secure part number 80611450448 with time and cost savings. If you prefer one-on-one assistance from one of our representatives, contact us via phone or email at any time; we are available around the clock!
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
