1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

Use the form to request a quote for Grainger Approved part number 8410 - RFQ NOW!

Part Number : 8410 Manufacturer : Grainger Approved
Description : assortment, 51-1/4 in. h, 23-1/5 in. w
Main Category : fasteners
Category : hardware
Sub Category : assortment cabinets

ASAP Semiconductor is a one-stop shop for top-quality Fasteners and Hardware parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number 8410, a Assortment, 51-1/4 In. H, 23-1/5 In. W item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
8T32F883B
RFQ
KM304A
RFQ

Product Characteristics of 8410

Overall Width 23-1/5"
Includes Shield Retainers, Trim Panel Retainers, Retaining Clips, Hood Insulation Retainers, Phillips Screw Retainers, Push Type Retainers, Ergo Tufloks, Molding Clips, Grommets, Wide Range U-Nuts, Thread Cutting Nuts, Flush Type Hole Plugs, Tek Screws, Sheet Metal Screws, Trim Screws, Sems Screws, License Plate Screws, Machine Screws, Jack Nuts, Well Nuts, Hex Flange Nuts, Hex Nuts, Extruded U-Nuts, CA Flange Bolts, CA Body Bolts, Dog Point Body Bolts, Nylon Blind Rivets, Aluminum Pop Rivets, Nylon Capped Pop Rivets, Aluminum/Steel Pop Rivets, Steel Pop Rivets, Aluminum Split Type Rivets, Aluminum/Steel Split Type Rivets, Nylon Butt Connectors, Nylon Ring Type Wire Terminals, Nylon Male and Female Spades, Fully Insulated Nylon Male and Female Spades, Mini Low Profile ATM Fuses, Mini ATM Fuses, ATO Fuses, ATX Maxi Fuses, Push On Bolt Retainers, Door Rod End Clips, Nylon Scotch Locks, Wire Loom Routing Clips, Barrel Nuts, Cotter Pins, Door Hinge Pin Repair Kits, Body Shims, Automotive Light Bulbs
Overall Depth 22-1/2"
Number of Pieces 6777
Number of Compartments Adjustable
Material Metal
Item Master Body Shop System
Overall Height 51-1/4"
Color Gray
Drawer Capacity 400 lb.

Use the form to request a quote for Grainger Approved part number 8410 - RFQ NOW!

Part Number : 8410 Manufacturer : Grainger Approved
Description : assortment, 51-1/4 in. h, 23-1/5 in. w
Main Category : fasteners
Category : hardware
Sub Category : assortment cabinets

ASAP Semiconductor is a one-stop shop for top-quality Fasteners and Hardware parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number 8410, a Assortment, 51-1/4 In. H, 23-1/5 In. W item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number 8410

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

To ensure Fasteners and Hardware parts we offer are the best on the market, we go above and beyond industry expectations with rigorous quality assurance practices carried out throughout each step of sourcing and fulfillment. For example, part number 8410 and other Assortment, 51-1/4 In. H, 23-1/5 In. W products trace back to leading manufacturers like Grainger Approved that we have carefully vetted, and countless listings undergo varying levels of testing and inspection prior to shipment. Coupled with other practices and dedications, we operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With this in mind, kick off procurement for part number 8410 today and see why so many rely on ASAP Semiconductor for their operational needs.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up