| Part Number : PK11-WHS-01 | Manufacturer : Grainger Approved | |
| Description : 1x2-1/2 o.d., flat washer, peek, not graded, anodized, pk10 | ||
| Main Category : fasteners | ||
| Category : washers | ||
| Sub Category : flat washers | ||
| Alternate P/N: PK11WHS01 | ||
ASAP Semiconductor is a one-stop shop for top-quality Fasteners and Washers parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number PK11-WHS-01, a 1X2-1/2 O.D., Flat Washer, Peek, Not Graded, Anodized, Pk10 item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Washer Standards | ANSI B18.221 |
| Fastener Finish | Anodized |
| Fits Bolt Sizes | 1" |
| Flat Washer Type | Flat Washer |
| For Use With | Bolts, Nuts, Screws, Studs |
| Item | Flat Washer |
| Washer Outside Dia. | 2-1/2" |
| Package Quantity | 10 |
| Washer Material Grade | Not Graded |
| Rockwell Hardness | D87.5 |
| System of Measurement | Inch |
| Approx. Pkg. Qty. | 10 |
| Temp. (F) | -50 Degrees to 500 Degrees |
| Thickness Tolerance | +/-0.015 |
| Thickness | 0.134" |
| Washer Basic Material | PEEK |
| Application | General Purpose |
| Washer Inside Dia. | 1-1/16" |
| Color | Brown |
| Package Weight | 0.1 |
| Part Number : PK11-WHS-01 | Manufacturer : Grainger Approved | |
| Description : 1x2-1/2 o.d., flat washer, peek, not graded, anodized, pk10 | ||
| Main Category : fasteners | ||
| Category : washers | ||
| Sub Category : flat washers | ||
ASAP Semiconductor is a one-stop shop for top-quality Fasteners and Washers parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number PK11-WHS-01, a 1X2-1/2 O.D., Flat Washer, Peek, Not Graded, Anodized, Pk10 item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
To ensure Fasteners and Washers parts we offer are the best on the market, we go above and beyond industry expectations with rigorous quality assurance practices carried out throughout each step of sourcing and fulfillment. For example, part number PK11-WHS-01 and other 1x2-1/2 O.D., Flat Washer, Peek, Not Graded, Anodized, Pk10 products trace back to leading manufacturers like Grainger Approved that we have carefully vetted, and countless listings undergo varying levels of testing and inspection prior to shipment. Coupled with other practices and dedications, we operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With this in mind, kick off procurement for part number PK11-WHS-01 today and see why so many rely on ASAP Semiconductor for their operational needs.
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
