| Part Number : WWG-TP154 | Manufacturer : Grainger Approved | |
| Description : low carbon steel standard taper pin, 2-1/2 l, 0.539 small end dia. | ||
| Main Category : fasteners | ||
| Category : pins | ||
| Sub Category : taper pins | ||
| Alternate P/N: WWGTP154 | ||
ASAP Semiconductor is a one-stop shop for top-quality Fasteners and Pins parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number WWG-TP154, a Low Carbon Steel Standard Taper Pin, 2-1/2 L, 0.539 Small End Dia. item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Single Shear Strength (PSI) | 78,000" |
| Fastener Length | 2-1/2" |
| Taper Pin Type | Standard |
| Length Tolerance | +/-0.01" |
| Large End Dia. | 0.591" |
| Single Shear Strength (Lbs.) | 60,000" |
| Large End Dia. Tolerance | -0.0007 to +0.0013" |
| Size | #9 |
| Rockwell Hardness | B85 |
| System of Measurement | Inch |
| Small End Dia. | 0.539" |
| Item | Taper Pin |
| Fastener Finish | Plain |
| Basic Material | Low Carbon Steel |
| Package Quantity | 10 |
| Part Number : WWG-TP154 | Manufacturer : Grainger Approved | |
| Description : low carbon steel standard taper pin, 2-1/2 l, 0.539 small end dia. | ||
| Main Category : fasteners | ||
| Category : pins | ||
| Sub Category : taper pins | ||
ASAP Semiconductor is a one-stop shop for top-quality Fasteners and Pins parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number WWG-TP154, a Low Carbon Steel Standard Taper Pin, 2-1/2 L, 0.539 Small End Dia. item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
To ensure Fasteners and Pins parts we offer are the best on the market, we go above and beyond industry expectations with rigorous quality assurance practices carried out throughout each step of sourcing and fulfillment. For example, part number WWG-TP154 and other Low Carbon Steel Standard Taper Pin, 2-1/2 L, 0.539 Small End Dia. products trace back to leading manufacturers like Grainger Approved that we have carefully vetted, and countless listings undergo varying levels of testing and inspection prior to shipment. Coupled with other practices and dedications, we operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With this in mind, kick off procurement for part number WWG-TP154 today and see why so many rely on ASAP Semiconductor for their operational needs.
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
