| Part Number : FS102-001-313-HT-MP | Manufacturer : Markar | |
| Description : 180-? continuous hinge with holes, unfinished, door leaf: 83 x 1-13/16 w | ||
| Main Category : hardware | ||
| Category : door hardware | ||
| Sub Category : hinges | ||
| Alternate P/N: FS102001313HTMP | ||
ASAP Semiconductor is a one-stop shop for top-quality Hardware and Door Hardware parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number FS102-001-313-HT-MP, a 180-? Continuous Hinge With Holes, Unfinished, Door Leaf: 83 X 1-13/16 W item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Door Leaf Thickness | 0.125" |
| Frame Leaf Width | 1-11/16" |
| Required Door Thickness | 1-3/4" |
| Pin Dia. | 3/16" |
| Mounting | Full Surface |
| Standards | ANSI/BHMA Standard A 156.26 Grade 2 |
| Hole Spacing | 6" |
| Overall Width | 3-3/8" |
| Door Leaf Width | 1-11/16" |
| Finish | Dark Bronze |
| Holes per Leaf | 21 |
| Holes | With |
| Item | Continuous Hinge |
| Overall Knuckle Height | 2" |
| Ligature Resistant | Yes |
| Load Capacity | 540 lb. |
| Pin Material | Stainless Steel |
| Material | Aluminum |
| Door Leaf Height | 84" |
| Pin Type | Hospital Tip |
| Hardware | Included |
| Length | 84" |
| Frame Leaf Height | 84" |
| Range of Motion | 180 Degrees |
| Frame Leaf Thickness | 0.125" |
| Orientation | Left Hand |
| Part Number : FS102-001-313-HT-MP | Manufacturer : Markar | |
| Description : 180-? continuous hinge with holes, unfinished, door leaf: 83 x 1-13/16 w | ||
| Main Category : hardware | ||
| Category : door hardware | ||
| Sub Category : hinges | ||
ASAP Semiconductor is a one-stop shop for top-quality Hardware and Door Hardware parts you can trust, our commitment to quality, competitive pricing, and rapid lead times ensuring that you can secure all that you need with ease. You have taken a particular interest in part number FS102-001-313-HT-MP, a 180-? Continuous Hinge With Holes, Unfinished, Door Leaf: 83 X 1-13/16 W item that is currently available for purchase on our website at any time. If you are interested in learning more about this particular listing, be sure to fill out and submit the form provided below on this page with as much information as you can regarding your unique needs and restrictions. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
To ensure Hardware and Door Hardware parts we offer are the best on the market, we go above and beyond industry expectations with rigorous quality assurance practices carried out throughout each step of sourcing and fulfillment. For example, part number FS102-001-313-HT-MP and other 180-? Continuous Hinge With Holes, Unfinished, Door Leaf: 83 X 1-13/16 W products trace back to leading manufacturers like Markar that we have carefully vetted, and countless listings undergo varying levels of testing and inspection prior to shipment. Coupled with other practices and dedications, we operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With this in mind, kick off procurement for part number FS102-001-313-HT-MP today and see why so many rely on ASAP Semiconductor for their operational needs.
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
