1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

203010 Marine Part by Bowman | Get a Quote for Engine Spares & Gearboxes Parts

Part Number : 203010 Manufacturer : Bowman
Description : dc50 oil cooler (40hp / 3/8"" bsp oil / 22mm id water)
Category : Oil Coolers & Accessories
Main Category : Engine Spares & Gearboxes
Sub Category : Oil Coolers

When sourcing dependable Engine Spares & Gearboxes Dc50 Oil Cooler (40Hp / 3/8"" Bsp Oil / 22Mm Id Water) marine parts, it is important to work with a supplier that understands marine procurement requirements. This page allows you to submit a quote request for part number 203010 by Bowman, a component commonly sourced for maintenance, repair, and replacement needs within marine and offshore systems. Alongside 203010, buyers can also explore additional marine components by Bowman available within our catalog.

Part Specification of 203010

Connections Oil: 3/8"" BSPÊfemale, Raw Water: 22mm via neoprene rubber end caps"
Country of Origin United Kingdom
Diameter OD: 51mm
For Maximum Horsepower 40HP (30kw)
Gearboxes Transmitting Up To 100HP - 75kw
Internal Oil Volume 80ml
Internal Water Volume 160ml
Length 210mm (including end caps), 125mm (excluding end caps)"
Maximum Pressure Working Oil Pressure: 435 PSI (30 Bar), Working Water Pressure: 29 PSI (2 Bar)"
Model DC50
Operating Temperature 125¡C Maximum
Raw Water Flow 60 LPM maximum

Request a Quote for Part Number 203010

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

To support quality and traceability, we follow a strict sourcing process for all listed marine components. As part of our NO CHINA SOURCING policy, Oil Coolers parts are sourced only from trusted manufacturers such as Bowman and other approved suppliers listed within our Approved Vendor List (AVL). This approach helps ensure that Dc50 Oil Cooler (40Hp / 3/8"" Bsp Oil / 22Mm Id Water) components can be traced back to their original manufacturing source.

After submitting the RFQ form below for 203010, your request is reviewed by a sourcing specialist to evaluate availability and fulfillment options based on your specified requirements. If needed, buyers may also reach out directly for additional assistance during the quotation process.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up