RND-16M1 Marine Part by R&D Marine | Get a Quote for Engine Spares & Gearboxes Parts

Part Number : RND-16M1	Manufacturer : R&D Marine
Description : r&d drive plate for (10 teeth spline, 298.5mm od, 400 lbft torque)
Category : Adaptor & Drive Plates
Main Category : Engine Spares & Gearboxes
Sub Category : Drive Plates

When sourcing dependable Engine Spares & Gearboxes R&D Drive Plate For (10 Teeth Spline, 298.5Mm Od, 400 Lbft Torque) marine parts, it is important to work with a supplier that understands marine procurement requirements. This page allows you to submit a quote request for part number RND-16M1 by R&D Marine, a component commonly sourced for maintenance, repair, and replacement needs within marine and offshore systems. Alongside RND-16M1, buyers can also explore additional marine components by R&D Marine available within our catalog.

Part Specification of RND-16M1

Bolt Hole PCD (Pitch Circle Diameter)	6 x 8.1mm on 200mm PCD, 6 x 8.1mm on 250mm PCD, 6 x 8.1mm on 269.9mm PCD and 6 x 8.1mm on 273mm PCD."
Country of Origin	United Kingdom
Diameter	OD: 298.5mm (11.75"")"
Element	Loop
Gearbox Model	PRM 175, PRM 250, PRM 265, PRM 310"
Gearbox Spline	10 teeth SAE 1 1/8"" x 10T (28.6mm diameter)"
Number of Fixing Holes	6
Suitability	PRM Gearboxes: 175, 250, 265 & 310."
Thickness	Maximum: 35mm (1.38"")"
Torque	540 Nm, 400 lbft"

Related Marine Components RND-16M1

RND-49AD5	RND-18L2
RND-21R5	RND-42AN8
RND-22AM8	RND-14G1
RND-22A60	RND-42AN37
RND-22B8	RND-3M2
RND-13B16	RND-3G2
RND-13AM60	RND-13B4
RND-12A60	RND-12B37

Top Marine Parts Manufacturers

jubilee	gates
faria beede	asap
separ	prop protector
morris lubricants	cleenlife
seaflow	racor

Request a Quote for Part Number RND-16M1

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.

* All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

To support quality and traceability, we follow a strict sourcing process for all listed marine components. As part of our NO CHINA SOURCING policy, Drive Plates parts are sourced only from trusted manufacturers such as R&D Marine and other approved suppliers listed within our Approved Vendor List (AVL). This approach helps ensure that R&D Drive Plate For (10 Teeth Spline, 298.5Mm Od, 400 Lbft Torque) components can be traced back to their original manufacturing source.

After submitting the RFQ form below for RND-16M1, your request is reviewed by a sourcing specialist to evaluate availability and fulfillment options based on your specified requirements. If needed, buyers may also reach out directly for additional assistance during the quotation process.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload