| Part Number : RND-22B37 | Manufacturer : R&D Marine |
| Description : r&d drive plate for zf hurth & (10 teeth spline / 266.7mm od) | |
| Category : Adaptor & Drive Plates | |
| Main Category : Engine Spares & Gearboxes | |
| Sub Category : Drive Plates | |
When sourcing dependable Engine Spares & Gearboxes R&D Drive Plate For Zf Hurth & (10 Teeth Spline / 266.7Mm Od) marine parts, it is important to work with a supplier that understands marine procurement requirements. This page allows you to submit a quote request for part number RND-22B37 by R&D Marine, a component commonly sourced for maintenance, repair, and replacement needs within marine and offshore systems. Alongside RND-22B37, buyers can also explore additional marine components by R&D Marine available within our catalog.
| Bolt Hole PCD (Pitch Circle Diameter) | 12 x 8.1 on 222.3mm PCD, 6 x 8.1 on 244.5mm PCD spaced in 3 groups of 2 apart 23¡59''07, 12 x 8.1 on 246mm PCD and 12 x 8.1 on 242mm PCD." |
| Country of Origin | United Kingdom |
| Diameter | OD: 266.7mm (10.5"")" |
| Element | Loop |
| Gearbox Model | Borgwarner 500, PRM 80, PRM 90, PRM 120, PRM 125, TMC 30, TMC 40, TMC 50, TMC 60, ZF 10, ZF 12, ZF Hurth HBW 5, ZF Hurth HBW 10, ZF Hurth HBW 15, ZF Hurth HBW 50, ZF Hurth HBW 125" |
| Gearbox Spline | 10 teeth B10 x 23 x 29 DIN 5464 (29mm diameter) |
| Number of Fixing Holes | 6 Spaced in three groups of two, 12" |
| Suitability | PRM 80, 90, 120, 125 & 150 gearbox, ZF 10 & 12 gearbox, Hurth HBW 5, 10, 15, 50 & 125 gearboxes, Technodrive TMC 30, 40, 50 & 60 gearboxes & Borgwarner 500." |
| Thickness | Maximum: 32mm (1.25"")" |
| Torque | 135 Nm, 100 lbft" |
To support quality and traceability, we follow a strict sourcing process for all listed marine components. As part of our NO CHINA SOURCING policy, Drive Plates parts are sourced only from trusted manufacturers such as R&D Marine and other approved suppliers listed within our Approved Vendor List (AVL). This approach helps ensure that R&D Drive Plate For Zf Hurth & (10 Teeth Spline / 266.7Mm Od) components can be traced back to their original manufacturing source.
After submitting the RFQ form below for RND-22B37, your request is reviewed by a sourcing specialist to evaluate availability and fulfillment options based on your specified requirements. If needed, buyers may also reach out directly for additional assistance during the quotation process.
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
