1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

RND-45AN61 Marine Part by R&D Marine | Get a Quote for Engine Spares & Gearboxes Parts

Part Number : RND-45AN61 Manufacturer : R&D Marine
Description : r&d drive plate for (10 teeth spline, 292.1mm diameter)
Category : Adaptor & Drive Plates
Main Category : Engine Spares & Gearboxes
Sub Category : Drive Plates

When sourcing dependable Engine Spares & Gearboxes R&D Drive Plate For (10 Teeth Spline, 292.1Mm Diameter) marine parts, it is important to work with a supplier that understands marine procurement requirements. This page allows you to submit a quote request for part number RND-45AN61 by R&D Marine, a component commonly sourced for maintenance, repair, and replacement needs within marine and offshore systems. Alongside RND-45AN61, buyers can also explore additional marine components by R&D Marine available within our catalog.

Part Specification of RND-45AN61

Bolt Hole PCD (Pitch Circle Diameter) 12 x 8.1mm on 273mm (10.75"") PCD."
Country of Origin United Kingdom
Diameter OD: 292.1mm (11.5"")"
Element High Deflection
Gearbox Model PRM 100, PRM 101, PRM 140, PRM 160, PRM 260, PRM 280"
Gearbox Spline 10 teeth SAE 1"" x 10T (25.4mm diameter)"
Number of Fixing Holes 12
Replaces R&D 45AC61
Suitability PRM Gearboxes: 100, 101, 140, 160, 260 & 280."
Thickness Maximum: 35mm (1.38"")"
Torque 270 Nm, 200 lbft"

Request a Quote for Part Number RND-45AN61

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

To support quality and traceability, we follow a strict sourcing process for all listed marine components. As part of our NO CHINA SOURCING policy, Drive Plates parts are sourced only from trusted manufacturers such as R&D Marine and other approved suppliers listed within our Approved Vendor List (AVL). This approach helps ensure that R&D Drive Plate For (10 Teeth Spline, 292.1Mm Diameter) components can be traced back to their original manufacturing source.

After submitting the RFQ form below for RND-45AN61, your request is reviewed by a sourcing specialist to evaluate availability and fulfillment options based on your specified requirements. If needed, buyers may also reach out directly for additional assistance during the quotation process.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up