| Part Number : 704484 | Manufacturer : Asap Electrical |
| Description : liquid dip level sender 95cm (us resistance) | |
| Category : Gauges & Senders | |
| Main Category : Fuel Systems | |
| Sub Category : Fuel Level Senders | |
Hunting for 704484, a Liquid Dip Level Sender 95Cm (Us Resistance) from Asap Electrical, is a Fuel Level Senders component used across marine maintenance, repair, and overhaul, from commercial fleets to offshore platforms. ASAP Semiconductor helps procurement teams source it with traceability built in.
Verify 704484 Before You Order
Part number: 704484
Description: Liquid Dip Level Sender 95Cm (Us Resistance)
Manufacturer: Asap Electrical
Category: Fuel Systems
Browse more Asap Electrical Fuel Systems components in our catalog if you want to source several items from one place.
A Quote Built Around Your Schedule
The RFQ form on this page already has your part number and manufacturer filled in. You only need to tell us:
1. How many units you need
2. Your target price, if you have one
3. The date you need the part
A sourcing specialist checks availability and fulfillment options against your requirements and typically replies within 15 minutes during business hours. Ordering a full job list? Upload your parts list or BOM below the form and we'll work through it for you.
What Your QA and Procurement Teams Will Check
Traceable to source. 704484 ships with full traceability documentation, so this Liquid Dip Level Sender 95Cm (Us Resistance) can be traced back to its original manufacturing source.
Inspected before it ships. Every part passes a 32-point quality inspection before it leaves our facility.
No China sourcing. Under our NO CHINA SOURCING policy, Fuel Level Senders parts come only from trusted manufacturers such as Asap Electrical and other suppliers on our Approved Vendor List (AVL).
Worldwide since 2009. Procurement teams around the world rely on us for verified marine components.
Need a hand while your quote is in progress? Reach out to us directly and we'll step in.
| Diameter | 5 x 5.1mm diameter holes on a 54mm PCD (Holes Not Evenly Spaced), Flange OD: 70mm" |
| Dimensions | Hole for float: 42mm clearance |
| Gauge/Sender Resistance | American |
| Height | Cap is 32mm |
| Length | 950mm |
| Notes | Recommended distance from bottom of tank 2.5cm |
| Number of Stations | Single Station (Works one gauge) |
| Resistance | Empty - 240 Ohms / Mid - 103 Ohms / Full - 33.5 Ohms |
| Suitability | Drinking Water, Diesel and Petrol." |
| Thread Size | 1-1/4"" BSP" |
| Voltage | 12 & 24V DC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
