1 items in cart.

 13F026-00-0P

INSTANT RFQ
INSTANT RFQ
Enter List

504482 Marine Part by Jabsco | Get a Quote for Galley Equipment Parts

Part Number : 504482 Manufacturer : Jabsco
Description : 50880-1000 diaphragm bilge pump (12v / 16lpm / 19mm, 25mm hose)
Category : Domestic Water Pumps
Main Category : Galley Equipment
Sub Category : Electric Water Transfer Pumps

When sourcing dependable Galley Equipment 50880-1000 Diaphragm Bilge Pump (12V / 16Lpm / 19Mm, 25Mm Hose) marine parts, it is important to work with a supplier that understands marine procurement requirements. This page allows you to submit a quote request for part number 504482 by Jabsco, a component commonly sourced for maintenance, repair, and replacement needs within marine and offshore systems. Alongside 504482, buyers can also explore additional marine components by Jabsco available within our catalog.

Part Specification of 504482

Amps 8A Max
Certification / Approvals ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, Built to ISO15083 Spec, Meets BSEN50081 (Electro Magnetic Compatibility)"
Flow Rate at 1 Meter Head 960LPH (253 US GPH)
Fuse 10A
Height 132mm (5.2"")"
Inlet / Outlet 19mm (3/4"") & 25mm (1"") ID hose"
Length 294mm (11.6"")"
Maximum Recommended Head 6 Meters (19.6 Feet)
Model 50880-1000
Self Primes up to 3M (9.8ft)
Series 50880 Series
Voltage 12V DC
Width 159mm (6.25"")"

Request a Quote for Part Number 504482

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

To support quality and traceability, we follow a strict sourcing process for all listed marine components. As part of our NO CHINA SOURCING policy, Electric Water Transfer Pumps parts are sourced only from trusted manufacturers such as Jabsco and other approved suppliers listed within our Approved Vendor List (AVL). This approach helps ensure that 50880-1000 Diaphragm Bilge Pump (12V / 16Lpm / 19Mm, 25Mm Hose) components can be traced back to their original manufacturing source.

After submitting the RFQ form below for 504482, your request is reviewed by a sourcing specialist to evaluate availability and fulfillment options based on your specified requirements. If needed, buyers may also reach out directly for additional assistance during the quotation process.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up