V-SAPRO12 Marine Part by Vetus | Get a Quote for Sanitation Parts

Part Number : V-SAPRO12	Manufacturer : Vetus
Description : sani-processor macerator and pump (12v)
Category : Macerator Pumps
Main Category : Sanitation

When sourcing dependable Sanitation Sani-Processor Macerator And Pump (12V) marine parts, it is important to work with a supplier that understands marine procurement requirements. This page allows you to submit a quote request for part number V-SAPRO12 by Vetus, a component commonly sourced for maintenance, repair, and replacement needs within marine and offshore systems. Alongside V-SAPRO12, buyers can also explore additional marine components by Vetus available within our catalog.

Part Specification of V-SAPRO12

Diameter	98mm
Flow Rate	50 LPM (13.2 US GPM) at 4m Head
Height	360mm (14.2"")"
Inlet	Toilet to Sani-Processor: 1 x 102mm (4"") ID hose, 4m max length for toilet. 2 x 40mm (1-9/16"") ID hose for Washbasin/Shower connection. 1 x 40mm (1-9/16"") ID hose for Washbasin/bidet connection"
Length	420mm
Maximum Recommended Head	4M (13.1ft)
Model	SAPRO12
Outlet	Sani-Processor to Holding Tank: 19mm (3/4"") ID hose, 20m max length"
Voltage	12V DC
Wattage	Power Consumption: 370W Approximately
Width	120mm (4.7"")"

Related Marine Components V-SAPRO12

V-SSV100	V-SET0049
V-SOL324D	V-SETKS1
V-SENSOR580	V-SENSOR480
V-SSV150	V-SOL324S
V-SHDA760	V-SENSORA
V-SSAS	V-SENSORA
V-SET0090	V-SENSORA
V-SISCO	V-SENSOR780

Top Marine Parts Manufacturers

pilot	victron
perko	morse
orbitrade marine	scanstrut
foresti & suardi	separ
kobelt	morris lubricants

Request a Quote for Part Number V-SAPRO12

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.

* All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

To support quality and traceability, we follow a strict sourcing process for all listed marine components. As part of our NO CHINA SOURCING policy, parts are sourced only from trusted manufacturers such as Vetus and other approved suppliers listed within our Approved Vendor List (AVL). This approach helps ensure that Sani-Processor Macerator And Pump (12V) components can be traced back to their original manufacturing source.

After submitting the RFQ form below for V-SAPRO12, your request is reviewed by a sourcing specialist to evaluate availability and fulfillment options based on your specified requirements. If needed, buyers may also reach out directly for additional assistance during the quotation process.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload