ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 2520-00-114-3435 (2520001143435). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 2520001143435 |
| Manufacturers | General Motors Corp |
| Item Name | Shaft Axle Automotive |
| INC Code | 10852 |
| Federal Supply Group (FSG) | 25 Vehicular Equipment Components |
| Federal Supply Class (FSC) | 2520 Vehicular Power Transmission Components |
| National Item Identification Number (NIIN) | 00-114-3435 (001143435) |
| NCB Code | USA (00) |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.514 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 33.810 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 60.0 NOMINAL ROCKWELL C |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.560 INCHES NOMINAL |
| AMEL | FIRST END BEARING SEAT DIAMETER | 1.618 INCHES NOMINAL |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 1.770 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 1.715 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.250 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 5 UNTHREADED HOLE |
| BBCF | SECOND END SPLINE QUANTITY | 30 |
| BNPK | SECOND END FACILITY DIAMETER | 0.745 INCHES MINIMUM AND 0.754 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| BNTG | FIRST END BEARING SEAT WIDTH | 1.850 INCHES NOMINAL |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTR | SECOND END FACILITY WIDTH | 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| BNTS | SECOND END FACILITY LOCATION | 0.308 IN. MIN 0.312 IN. MAX FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYS | FLANGE OVERALL THICKNESS | 0.390 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.390 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1050 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1050 ASSN STD SINGLE MATERIAL RESPONSE |
| 2590-01-603-4461 (2590016034461) | 2590-01-326-9194 (2590013269194) | 2510-01-569-6023 (2510015696023) | 2520-01-139-1753 (2520011391753) |
| 2530-01-252-2559 (2530012522559) | 2510-01-557-5679 (2510015575679) | 2530-01-249-6439 (2530012496439) | 2540-01-329-8572 (2540013298572) |
| 2530-00-986-0690 (2530009860690) | 2540-01-429-0840 (2540014290840) | 2590-01-691-4487 (2590016914487) | 2590-01-666-6571 (2590016666571) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
