ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 2520-00-626-6597 (2520006266597). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 2520006266597 |
| Manufacturers | Clark Equipment Company , Clark Material Handling Company , Sasco Inc , Spalla Inc |
| Item Name | Shaft Axle Automotive |
| INC Code | 10852 |
| Federal Supply Group (FSG) | 25 Vehicular Equipment Components |
| Federal Supply Class (FSC) | 2520 Vehicular Power Transmission Components |
| National Item Identification Number (NIIN) | 00-626-6597 (006266597) |
| NCB Code | USA (00) |
| Part No | Manufacturer | Item Name | CAGE Code | Type | Status | Availability | RFQ | |
|---|---|---|---|---|---|---|---|---|
| 809H89 | clark material handling company | shaft axle automotive | 89749 | a | a | Avl | RFQ |
|
| 809H89 | clark equipment company | shaft axle automotive | 12603 | a | r | Avl | RFQ |
|
| 905591 | spalla inc | shaft axle automotive | 22852 | a | f | Avl | RFQ |
|
| 905591 | sasco inc | shaft axle automotive | 58275 | NA | NA | Avl | RFQ |
|
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 26.531 INCHES MINIMUM AND 26.656 INCHES MAXIMUM |
| ABUJ | THREAD SIZE | 3/8-16 |
| AETC | METALLIC HARDNESS RATING | 25.0 MINIMUM ROCKWELL C AND 60.0 MAXIMUM ROCKWELL C |
| AHTC | FLANGE OUTSIDE DIAMETER | 4.745 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AMGA | SECOND END SPLINE LENGTH | 1.350 INCHES MINIMUM AND 1.352 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.136 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 6 UNTHREADED HOLE |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTR | SECOND END FACILITY WIDTH | 0.250 INCHES NOMINAL |
| BNTS | SECOND END FACILITY LOCATION | LOCATED AT SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYS | FLANGE OVERALL THICKNESS | 0.812 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END |
| MATL | UNABLE TO DECODE | UNABLE TO DECODE OR UNABLE TO DECODE |
| MATT | MATERIAL | STEEL COMP 4063 OR STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,FS4063-CANCELED FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-633,FS1045-CANCELED FED SPEC 2ND MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | CONTROLLED DIFFERENTIAL |
| 2590-01-603-4461 (2590016034461) | 2590-01-326-9194 (2590013269194) | 2510-01-569-6023 (2510015696023) | 2520-01-139-1753 (2520011391753) |
| 2530-01-252-2559 (2530012522559) | 2510-01-557-5679 (2510015575679) | 2530-01-249-6439 (2530012496439) | 2540-01-329-8572 (2540013298572) |
| 2530-00-986-0690 (2530009860690) | 2540-01-429-0840 (2540014290840) | 2590-01-691-4487 (2590016914487) | 2590-01-666-6571 (2590016666571) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
