ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 2520-00-737-4987 (2520007374987). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 2520007374987 |
| Manufacturers | Am General Llc , Dana Commercial Vehicle Products , Dana Corp |
| Item Name | Shaft Axle Automotive |
| INC Code | 10852 |
| Federal Supply Group (FSG) | 25 Vehicular Equipment Components |
| Federal Supply Class (FSC) | 2520 Vehicular Power Transmission Components |
| National Item Identification Number (NIIN) | 00-737-4987 (007374987) |
| NCB Code | USA (00) |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMCZ | FIRST END KEYWAY WIDTH | 0.2485 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| AMEP | FIRST END DISTANCE FROM BEARING SEAT TO END | 4.031 INCHES MINIMUM AND 5.500 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.271 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | TAPERED |
| ATKT | FIRST END THREAD SERIES | UNC |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| MATL | UNABLE TO DECODE | UNABLE TO DECODE |
| ABHP | OVERALL LENGTH | 29.6775 INCHES MINIMUM AND 29.7275 INCHES MAXIMUM |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| AMCP | FIRST END TAPER | 1.000 INCHES NOMINAL PER FOOT |
| AMCR | FIRST END TAPER MAJOR DIAMETER | 1.373 INCHES NOMINAL |
| AMDG | FIRST END KEYWAY DEPTH | 0.127 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| AMEL | FIRST END BEARING SEAT DIAMETER | 1.378 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.039 INCHES MINIMUM AND 1.049 INCHES MAXIMUM |
| AMQF | SECOND END TYPE | SPLINED |
| AQSQ | FIRST END THREAD SIZE | 1-14 |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.562 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| BNTC | FIRST END FACILITY WIDTH | 0.125 INCHES NOMINAL |
| BNTD | FIRST END FACILITY LOCATION | LOCATED 5-1/4 IN. FROM SHAFT END |
| BNTF | FIRST END BEARING SEAT | INCLUDED |
| BNTG | FIRST END BEARING SEAT WIDTH | 1.000 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYZ | FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1033 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1033 ASSN STD SINGLE MATERIAL RESPONSE |
| 2590-01-603-4461 (2590016034461) | 2590-01-326-9194 (2590013269194) | 2510-01-569-6023 (2510015696023) | 2520-01-139-1753 (2520011391753) |
| 2530-01-252-2559 (2530012522559) | 2510-01-557-5679 (2510015575679) | 2530-01-249-6439 (2530012496439) | 2540-01-329-8572 (2540013298572) |
| 2530-00-986-0690 (2530009860690) | 2540-01-429-0840 (2540014290840) | 2590-01-691-4487 (2590016914487) | 2590-01-666-6571 (2590016666571) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
