ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 3020-00-275-3042 (3020002753042). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 3020002753042 |
| Manufacturers | Caterpillar Inc , Industrial Parts Depot Inc |
| Item Name | Gear Helical |
| INC Code | 05464 |
| Federal Supply Group (FSG) | 30 Mechanical Power Transmission Equipment |
| Federal Supply Class (FSC) | 3020 Gears Pulleys Sprockets and Transmission Chain |
| National Item Identification Number (NIIN) | 00-275-3042 (002753042) |
| NCB Code | USA (00) |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 6.3333 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 82.9 ROCKWELL B MINIMUM HUB AND 96.4 ROCKWELL B MAXIMUM HUB |
| CQFM | HARDNESS RATING | 82.9 ROCKWELL B MINIMUM TEETH AND 96.4 ROCKWELL B MAXIMUM TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.6165 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 25.5438 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.1848 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.625 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.7498 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.4935 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.605 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 3.750 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TWO 0.453 IN. DIA PULLER HOLES DRILLED 1.625 IN. DEEP AND COUNTERBORED 0.516 IN. BY 0.375 IN. DEEP,TAPPED 0.500-20 NF THD SIZE,180 DEG APART 0N A 4.938 IN. DIA BOLT CIRCLE,LETTER C MARKED ON SIDE OF GEAR FACE 48 DEG 51 MIN 30 SEC TO LEFT OF |
| MATT | MATERIAL | STEEL COMP 1045 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 1045 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| 3020-01-329-9943 (3020013299943) | 3040-01-117-1156 (3040011171156) | 3040-01-360-5596 (3040013605596) | 3040-00-102-0365 (3040001020365) |
| 3040-01-537-0611 (3040015370611) | 3040-01-624-5258 (3040016245258) | 3020-00-118-4055 (3020001184055) | 3020-00-272-6024 (3020002726024) |
| 3040-01-309-0824 (3040013090824) | 3020-00-448-5254 (3020004485254) | 3020-00-014-1855 (3020000141855) | 3040-00-908-0674 (3040009080674) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
