ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 3110-00-063-9706 (3110000639706). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 3110000639706 |
| Manufacturers | Timken Corporation |
| Item Name | Bearing Ball Rod End |
| INC Code | 00049 |
| Federal Supply Group (FSG) | 31 Bearings |
| Federal Supply Class (FSC) | 3110 Bearings Antifriction Unmounted |
| National Item Identification Number (NIIN) | 00-063-9706 (000639706) |
| NCB Code | USA (00) |
| Part No | Manufacturer | Item Name | CAGE Code | Type | Status | Availability | RFQ | |
|---|---|---|---|---|---|---|---|---|
| RAP3F5-2E9107A | timken corporation | bearing ball rod end | 21335 | a | a | Avl | RFQ |
|
| RAP3F52E9107 | timken corporation | bearing ball rod end | 21335 | a | a | Avl | RFQ |
|
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | PRELUBRICATED WITH 40 TO 50 PERCENT OF SPECIFIED GREASE; MAX NO. LOAD STARTING TORQUE 0.6400 OZ; BEARING SHALL CONFORM TO GENERAL DYNAMICS F. W. SPEC C 3116; DRILL HOLE NO. 50 DRILL; THRU SHANK PARALLEL WITH BORE 0.3125 IN. FROM SHANK END; MILL SLOT IN SHANK END PARALLEL WITH BORE 0.0610 IN. DEEP BY 0.0700 IN. WIDE AND 0.0004 IN. RADIAL CLEARANCE |
| ASDB | WIDTH ACROSS FLATS | 0.4370 INCHES NOMINAL |
| AAZE | SHANK DIAMETER | 0.4370 INCHES NOMINAL |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END |
| STYL | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| MATT | MATERIAL | STEEL BALL STEEL INNER RING STEEL OUTER RING RUBBER SYNTHETIC SEAL STEEL SHAFT |
| ABXV | BORE DIAMETER | 0.1900 INCHES NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| AAJD | THREAD CLASS | 3B |
| AGGY | SHANK THREAD LENGTH | 0.8125 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AGVT | OUTER RING WIDTH | 0.3280 INCHES NOMINAL |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGVU | INNER RING WIDTH | 0.4370 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3750 INCHES NOMINAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| ABHP | OVERALL LENGTH | 1.7650 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| 3120-01-481-9378 (3120014819378) | 3120-01-414-5948 (3120014145948) | 3110-01-266-9947 (3110012669947) | 3120-00-410-8177 (3120004108177) |
| 3120-00-922-6891 (3120009226891) | 3110-01-388-4173 (3110013884173) | 3110-01-486-5191 (3110014865191) | 3120-01-354-4609 (3120013544609) |
| 3110-00-905-6915 (3110009056915) | 3120-01-371-2078 (3120013712078) | 3120-01-471-5443 (3120014715443) | 3120-01-124-5080 (3120011245080) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
