ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 3110-00-789-7848 (3110007897848). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 3110007897848 |
| Manufacturers | Northrop Grumman Systems Corporation |
| Item Name | Bearing Ball Rod En |
| INC Code | 00049 |
| Federal Supply Group (FSG) | 31 Bearings |
| Federal Supply Class (FSC) | 3110 Bearings Antifriction Unmounted |
| National Item Identification Number (NIIN) | 00-789-7848 (007897848) |
| NCB Code | USA (00) |
| Part No | Manufacturer | Item Name | CAGE Code | Type | Status | Availability | RFQ | |
|---|---|---|---|---|---|---|---|---|
| 134AMM10038-1 | northrop grumman systems corporation | bearing ball rod en | 26512 | f | a | Avl | RFQ |
|
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABXV | BORE DIAMETER | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.1980 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.2400 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 134AM-10038-1,26512 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM ALIGNMENT RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.2435 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.2920 INCHES MINIMUM AND 2.3320 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.8540 INCHES MINIMUM AND 0.8940 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 1.0520 INCHES MINIMUM AND 1.0720 INCHES MAXIMUM |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CBBL | FEATURES PROVIDED | ALIGNING RING |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 0.10 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 4130 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 ALIGNMENT RING |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE ALIGNMENT RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM BALL |
| SFTT | SURFACE TREATMENT | CADMIUM INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALIGNMENT RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| TEST | TEST DATA DOCUMENT | 26512-134AM-10038-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNIN |
| 3120-01-481-9378 (3120014819378) | 3120-01-414-5948 (3120014145948) | 3110-01-266-9947 (3110012669947) | 3120-00-410-8177 (3120004108177) |
| 3120-00-922-6891 (3120009226891) | 3110-01-388-4173 (3110013884173) | 3110-01-486-5191 (3110014865191) | 3120-01-354-4609 (3120013544609) |
| 3110-00-905-6915 (3110009056915) | 3120-01-371-2078 (3120013712078) | 3120-01-471-5443 (3120014715443) | 3120-01-124-5080 (3120011245080) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
