ASAP Semiconductor is an industry-leading distributor for shopping for parts by National Stock Number (NSN) data, the items featured within this catalog all falling under NSN 5305-00-093-6763 (5305000936763). Toward the top of this page, you will find several details that pertain to this NSN, allowing you to confirm various aspects of these offerings to ensure accurate procurement. Meanwhile, the part numbers that we have available for purchase can be found below, with Request for Quote (RFQ) links provided alongside each should you wish to make a purchase. Our team is also available by phone or email to support you during the procurement process, so never hesitate to take the first step with us.
| Alternative NSN: | 5305000936763 |
| Manufacturers | Alcoa Global Fasteners Inc , Huck International Inc , Northrop Grumman Systems Corporation , Sps Technologies Inc |
| Item Name | Screw Close Tolerance |
| INC Code | 29294 |
| Federal Supply Group (FSG) | 53 Hardware and Abrasives |
| Federal Supply Class (FSC) | 5305 Screws |
| National Item Identification Number (NIIN) | 00-093-6763 (000936763) |
| NCB Code | USA (00) |
| Part No | Manufacturer | Item Name | CAGE Code | Type | Status | Availability | RFQ | |
|---|---|---|---|---|---|---|---|---|
| 106712-3-6T | sps technologies inc | screw close tolerance | 80539 | a | a | Avl | RFQ |
|
| BM19051-3-6 | huck international inc | screw close tolerance | 17446 | a | a | Avl | RFQ |
|
| GB510AE3-6T | northrop grumman systems corporation | screw close tolerance | 26512 | f | a | Avl | RFQ |
|
| HT8138-3-6T | alcoa global fasteners inc | screw close tolerance | 92215 | a | a | Avl | RFQ |
|
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.313 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.698 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.525 INCHES MINIMUM AND 0.592 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| 5325-01-531-6331 (5325015316331) | 5340-01-021-3819 (5340010213819) | 5320-01-163-4012 (5320011634012) | 5331-01-461-7036 (5331014617036) |
| 5310-01-670-9012 (5310016709012) | 5305-01-207-7518 (5305012077518) | 5310-00-546-5643 (5310005465643) | 5330-00-594-5133 (5330005945133) |
| 5330-01-126-8670 (5330011268670) | 5310-01-561-6112 (5310015616112) | 5330-01-119-3684 (5330011193684) | 5340-01-557-0618 (5340015570618) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
