| Part Number : LS5377-6T | Manufacturer : A And M Aerospace Inc | ||
| NSN : 5340-00-494-7595 (5340004947595) | |||
| Item Name : Bracket Angle | CAGE Code : 6Z800 | ||
| NIIN : 00-494-7595 (004947595) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16900 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: LS53776T | |||
Thank you for taking an interest in part number LS5377-6T, that of which is listed with the description Bracket Angle; Manufactured by A And M Aerospace Inc and listed alongside the NSN 5340004947595, part number LS5377-6T is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LS5377-6T | Manufacturer : A And M Aerospace Inc | ||
| NSN Number : 5340-00-494-7595 (5340004947595) | |||
| Item Name : Bracket Angle | CAGE Code : 6Z800 | ||
| NIIN : 004947595 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number LS5377-6T, that of which is listed with the description Bracket Angle; Manufactured by A And M Aerospace Inc and listed alongside the NSN 5340004947595, part number LS5377-6T is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-494-7595 Item PartTypeName: BRACKET,ANGLE | 5340 | 004947595 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LS5988-27016 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 1.930 INCHES MINIMUM AND 2.110 INCHES MAXIMUM |
| AHLG | SECOND LEG CORNER RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.290 NOMINAL CENTIMETERS |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.016 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.016 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AHQP | FIRST LEG CORNER RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE ZINC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
