| Part Number : HR-1-1 2-XC-CCP-43 | Manufacturer : Accurate Bushing Company | ||
| NSN : 3110-01-286-6144 (3110012866144) | |||
| Item Name : Cam Follower Needle Bearing | CAGE Code : 07484 | ||
| NIIN : 01-286-6144 (012866144) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00040 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HR112XCCCP43 | |||
Thank you for taking an interest in part number HR-1-1 2-XC-CCP-43, that of which is listed with the description Cam Follower Needle Bearing; Manufactured by Accurate Bushing Company and listed alongside the NSN 3110012866144, part number HR-1-1 2-XC-CCP-43 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HR-1-1 2-XC-CCP-43 | Manufacturer : Accurate Bushing Company | ||
| NSN Number : 3110-01-286-6144 (3110012866144) | |||
| Item Name : Cam Follower Needle Bearing | CAGE Code : 07484 | ||
| NIIN : 012866144 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number HR-1-1 2-XC-CCP-43, that of which is listed with the description Cam Follower Needle Bearing; Manufactured by Accurate Bushing Company and listed alongside the NSN 3110012866144, part number HR-1-1 2-XC-CCP-43 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-286-6144 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING | 3110 | 012866144 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4M340-150 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.7500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.4060 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.4990 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| AGRJ | STUD DIAMETER | 0.8750 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 1.5000 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CBBL | FEATURES PROVIDED | LUBRICATION HOLE |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR CAN FOLLWER NEEDLE BEARING |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; PLUG TO BE SUPPLIED TO CLOSE OFF UNUSED LUBE HOLE IN END OF SHANK; CROWNED OD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC ACETAL OR PLASTIC POLYAMIDE SEAL |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL COMP E52100 STUD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392 FED SPEC 1ST MATERIAL RESPONSE OR L-P-410 FED SPEC 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE STUD |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CHROMIUM ROLLER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | 76301-4-340 MANUFACTURERS STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
