| Part Number : AN501A10-12 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5305-00-616-4831 (5305006164831) | |||
| Item Name : Screw Machine | CAGE Code : 88044 | ||
| NIIN : 00-616-4831 (006164831) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AN501A1012 | |||
Thank you for taking an interest in part number AN501A10-12, that of which is listed with the description Screw Machine; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5305006164831, part number AN501A10-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
1343080 alberta ltd
CAGE Code: L0796 |
|
3 ring inc
CAGE Code: 68310 |
20th century spring mfg
CAGE Code: 0PZE8 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
5605 n illinois inc
CAGE Code: 089F4 |
|
331 l tech productions llc
CAGE Code: 01XA0 |
4 r electro systems
CAGE Code: 1T600 |
|
2101 llc
CAGE Code: 1GH76 |
12 volt shop
CAGE Code: Z0JM2 |
|
3m canada inc
CAGE Code: 09581,0GSY9,L2266 |
5dt inc
CAGE Code: 3BPF1 |
|
3m unitek corporation
CAGE Code: 90444 |
3gen corporation
CAGE Code: 3SPS3 |
|
28eme groupe geographique
CAGE Code: FAR17 |
| Part Number : AN501A10-12 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5305-00-616-4831 (5305006164831) | |||
| Item Name : Screw Machine | CAGE Code : 88044 | ||
| NIIN : 006164831 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AN501A10-12, that of which is listed with the description Screw Machine; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5305006164831, part number AN501A10-12 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-616-4831 Item PartTypeName: SCREW,MACHINE | 5305 | 006164831 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS35266-65 | 3 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.750 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.046 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
