| Part Number : AN176-14 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5306-00-144-3983 (5306001443983) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 88044 | ||
| NIIN : 00-144-3983 (001443983) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AN17614 | |||
Thank you for taking an interest in part number AN176-14, that of which is listed with the description Bolt Close Tolerance; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306001443983, part number AN176-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN176-14 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5306-00-144-3983 (5306001443983) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 88044 | ||
| NIIN : 001443983 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AN176-14, that of which is listed with the description Bolt Close Tolerance; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306001443983, part number AN176-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-144-3983 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 001443983 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NASM6812 | 1 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.578 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.203 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 0.938 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.376 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
