| Part Number : AN46-10 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5306-00-207-5429 (5306002075429) | |||
| Item Name : Bolt Eye | CAGE Code : 88044 | ||
| NIIN : 00-207-5429 (002075429) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01853 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AN4610 | |||
Thank you for taking an interest in part number AN46-10, that of which is listed with the description Bolt Eye; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306002075429, part number AN46-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
394 test maintenance squadron sac
CAGE Code: 33044 |
3m belgium nv
CAGE Code: B2281 |
|
3075109 canada inc
CAGE Code: L09L0 |
1064100 alberta ltd
CAGE Code: L0C80 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
3m purification inc
CAGE Code: 15472 |
|
1343080 alberta ltd
CAGE Code: L0796 |
5605 n illinois inc
CAGE Code: 089F4 |
|
2709th af vehicle control group
CAGE Code: 10994 |
3m purification pty limited
CAGE Code: Z5295 |
|
14 dock drive inc
CAGE Code: 14677 |
1st solutions inc
CAGE Code: 0FY35,0TU77 |
|
498 msug
CAGE Code: 5VW08 |
11 30 elo touchsystems inc
CAGE Code: 1CEX6 |
|
3m united kingdom plc
CAGE Code: K0993,K8767 |
| Part Number : AN46-10 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5306-00-207-5429 (5306002075429) | |||
| Item Name : Bolt Eye | CAGE Code : 88044 | ||
| NIIN : 002075429 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AN46-10, that of which is listed with the description Bolt Eye; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306002075429, part number AN46-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-207-5429 Item PartTypeName: BOLT,EYE | 5306 | 002075429 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN46-10 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.624 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| AATK | EYE INSIDE DIAMETER | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.094 INCHES NOMINAL |
| AATR | SHANK LENGTH | 1.062 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| AAUA | EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.096 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| ABHP | OVERALL LENGTH | 2.094 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 33.0 ROCKWELL C MAXIMUM OVERALL |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.671 INCHES NOMINAL |
| CTWF | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.859 INCHES MINIMUM FIRST HOLE AND 0.891 INCHES MAXIMUM FIRST HOLE |
| CWXM | EYE OUTSIDE WIDTH | 0.750 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ROUND,CLOSED W/SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
