| Part Number : AN174CH13A | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5306-00-817-5983 (5306008175983) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 88044 | ||
| NIIN : 00-817-5983 (008175983) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number AN174CH13A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306008175983, part number AN174CH13A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN174CH13A | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5306-00-817-5983 (5306008175983) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 88044 | ||
| NIIN : 008175983 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AN174CH13A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306008175983, part number AN174CH13A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-00-817-5983 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 008175983 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN174CH13A | 3 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | HEXAGON |
| AAUB | HOLE DIAMETER | 0.046 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.436 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.390 INCHES MINIMUM AND 1.437 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 431 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
