| Part Number : AN173CH3A | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5306-01-092-4989 (5306010924989) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 88044 | ||
| NIIN : 01-092-4989 (010924989) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 27851 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number AN173CH3A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306010924989, part number AN173CH3A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN173CH3A | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5306-01-092-4989 (5306010924989) | |||
| Item Name : Bolt Close Tolerance | CAGE Code : 88044 | ||
| NIIN : 010924989 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AN173CH3A, that of which is listed with the description Bolt Close Tolerance; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306010924989, part number AN173CH3A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-092-4989 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 010924989 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 418011-5 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.375 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.453 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | HEXAGON FLATS |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP 431 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
