| Part Number : AN44-C4 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5306-01-230-3358 (5306012303358) | |||
| Item Name : Bolt Eye | CAGE Code : 88044 | ||
| NIIN : 01-230-3358 (012303358) | |||
| FSC Code : 5306 Bolts | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01853 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AN44C4 | |||
Thank you for taking an interest in part number AN44-C4, that of which is listed with the description Bolt Eye; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306012303358, part number AN44-C4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN44-C4 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5306-01-230-3358 (5306012303358) | |||
| Item Name : Bolt Eye | CAGE Code : 88044 | ||
| NIIN : 012303358 | |||
| FSC CODE : 5306 Bolts | |||
Thank you for taking an interest in part number AN44-C4, that of which is listed with the description Bolt Eye; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5306012303358, part number AN44-C4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-230-3358 Item PartTypeName: BOLT,EYE | 5306 | 012303358 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN44-C4 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.500 INCHES MINIMUM AND 0.579 INCHES MAXIMUM |
| AATK | EYE INSIDE DIAMETER | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| AATP | SHOULDER THICKNESS | 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AATR | SHANK LENGTH | 0.578 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AAUA | EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABHP | OVERALL LENGTH | 1.484 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.125 INCHES NOMINAL |
| CTWF | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.405 INCHES MINIMUM AND 0.437 INCHES MAXIMUM FIRST HOLE |
| CWXM | EYE OUTSIDE WIDTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 431 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | ROUND,CLOSED W/SHOULDER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
