| Part Number : AN742F10 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5340-00-515-0596 (5340005150596) | |||
| Item Name : Clamp Loop | CAGE Code : 88044 | ||
| NIIN : 00-515-0596 (005150596) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number AN742F10, that of which is listed with the description Clamp Loop; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5340005150596, part number AN742F10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN742F10 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5340-00-515-0596 (5340005150596) | |||
| Item Name : Clamp Loop | CAGE Code : 88044 | ||
| NIIN : 005150596 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number AN742F10, that of which is listed with the description Clamp Loop; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5340005150596, part number AN742F10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-515-0596 Item PartTypeName: CLAMP,LOOP | 5340 | 005150596 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN742F10 | 1 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.654 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.842 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 321 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
