| Part Number : AN735C26 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5340-01-310-9410 (5340013109410) | |||
| Item Name : Clamp Loop | CAGE Code : 88044 | ||
| NIIN : 01-310-9410 (013109410) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number AN735C26, that of which is listed with the description Clamp Loop; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5340013109410, part number AN735C26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN735C26 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5340-01-310-9410 (5340013109410) | |||
| Item Name : Clamp Loop | CAGE Code : 88044 | ||
| NIIN : 013109410 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number AN735C26, that of which is listed with the description Clamp Loop; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5340013109410, part number AN735C26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-310-9410 Item PartTypeName: CLAMP,LOOP | 5340 | 013109410 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN735C26 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.313 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ABMK | OVERALL WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.031 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 1.620 INCHES MINIMUM AND 1.630 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 302 OVERALL OR STEEL COMP 321 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | CENTER MOUNT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
