| Part Number : AN3067S2 | Manufacturer : Aeronautical Standards Group | ||
| NSN : 5365-00-308-3754 (5365003083754) | |||
| Item Name : Bushing Nonmetallic | CAGE Code : 88044 | ||
| NIIN : 00-308-3754 (003083754) | |||
| FSC Code : 5365 Bushings Rings Shims and Spacers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 39929 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number AN3067S2, that of which is listed with the description Bushing Nonmetallic; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5365003083754, part number AN3067S2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AN3067S2 | Manufacturer : Aeronautical Standards Group | ||
| NSN Number : 5365-00-308-3754 (5365003083754) | |||
| Item Name : Bushing Nonmetallic | CAGE Code : 88044 | ||
| NIIN : 003083754 | |||
| FSC CODE : 5365 Bushings Rings Shims and Spacers | |||
Thank you for taking an interest in part number AN3067S2, that of which is listed with the description Bushing Nonmetallic; Manufactured by Aeronautical Standards Group and listed alongside the NSN 5365003083754, part number AN3067S2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5365-00-308-3754 Item PartTypeName: BUSHING,NONMETALLIC | 5365 | 003083754 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AN3067S2 | 6 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.0344 INCHES NOMINAL |
| ADYT | CENTER HOLE DIAMETER | 0.100 INCHES NOMINAL |
| APGF | DESIGN TYPE | MULTIPLE HOLES |
| AYQE | HOLE SPACING | FIRST HOLE 0.099 FROM CENTER OF HOLE TO CENTER OF BUSHING SECOND HOLE 0.099 TO CENTER OF BUSHING |
| BWRR | LONGER TAPER SMALLEST DIAMETER | 0.438 INCHES NOMINAL |
| BWSK | TAPERED PORTION HEIGHT | 0.094 INCHES NOMINAL |
| BWSL | BOTTOM TAPERED PORTION HEIGHT | 0.250 INCHES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SEAL ASSEMBLY-3/8 INCH CONDUIT BOSS |
| FEAT | SPECIAL FEATURES | REQUIRES 2 KNIFE CUTS |
| MATT | MATERIAL | RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-24768/14 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ROUND TAPERED |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
