| Part Number : 14319-6 | Manufacturer : Aerosonic Corporation | ||
| NSN : 5305-01-616-0888 (5305016160888) | |||
| Item Name : Screw Machine | CAGE Code : 98810 | ||
| NIIN : 01-616-0888 (016160888) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 06657 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 143196 | |||
Thank you for taking an interest in part number 14319-6, that of which is listed with the description Screw Machine; Manufactured by Aerosonic Corporation and listed alongside the NSN 5305016160888, part number 14319-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
357319 ontario ltd
CAGE Code: 38510 |
3 vets inc
CAGE Code: 1MK20 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
21st century electronics inc
CAGE Code: 60092 |
|
3 d mfg inc
CAGE Code: 66484 |
43 apple hill llc
CAGE Code: 6AKU8 |
|
2h energy
CAGE Code: F1797 |
1spatial ltd
CAGE Code: U3518 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
31 mile equipment co
CAGE Code: 07PE3 |
|
5 11 inc
CAGE Code: 3YEL6 |
3m health care service center
CAGE Code: 0UTW7 |
|
3gen corporation
CAGE Code: 3SPS3 |
3m purification inc
CAGE Code: 15472 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
| Part Number : 14319-6 | Manufacturer : Aerosonic Corporation | ||
| NSN Number : 5305-01-616-0888 (5305016160888) | |||
| Item Name : Screw Machine | CAGE Code : 98810 | ||
| NIIN : 016160888 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 14319-6, that of which is listed with the description Screw Machine; Manufactured by Aerosonic Corporation and listed alongside the NSN 5305016160888, part number 14319-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-616-0888 Item PartTypeName: SCREW,MACHINE | 5305 | 016160888 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 14319-6 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.213 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.213 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.066 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AGAV | END ITEM IDENTIFICATION | OH58-D ARMY HELICOPTER IMPROVEMENT PROGRAM (AHIP) |
| AHYM | NOMINAL THREAD DIAMETER | 2.000 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 64 |
| CQWR | EXTERNAL THREAD TOLERANCE CLASS | 2A |
| CSYT | CHAMFER ANGLE | 40.0 DEGREES NOMINAL AND 50.0 DEGREES MINIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, MACHINE, SLOT, FILISTER HEAD |
| CYAU | SCREW MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-17091 TYPE I MIL SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
